-
CVE-2026-93342
•
published on September 22, 2026
MarketKing plugin for WordPress before 2.1.72 contains a missing authorization vulnerability in the marketking_duplicate_product AJAX action that allows authenticated attackers with subscriber-level access or higher to duplicate any vendor's product by supplying an arbitrary product ID. Attackers can bypass ownership verification to copy any vendor's product listings, including private product metadata, and assign the duplicated copy to their own vendor account without the victim's knowledge or consent.
-
CVE-2026-93340
•
published on September 21, 2026
Gladys Assistant before 5.1.0 contains a password reset link poisoning vulnerability that allows unauthenticated remote attackers to obtain valid password reset tokens for any account by exploiting the client-supplied origin parameter in the forgot_password endpoint without server-side validation. Attackers can send a crafted request specifying an attacker-controlled origin, causing the victim to receive a poisoned reset link that discloses the session token to the attacker, enabling full account takeover including administrator accounts.
-
CVE-2026-93330
•
published on September 29, 2026
Improper rule enforcement in the PAM Active Directory provider in Devolutions Server 2026.3.5 allows a user with PAM edit permissions to bypass the Devolutions Gateway host ruleset.
-
CVE-2026-93323
•
published on October 5, 2026
The Dockerfile frontend loaded the Dockerfile and .dockerignore files of a build context into memory without a size limit. A build context containing an oversized file could make buildkitd allocate memory proportional to that file, potentially exhausting memory and terminating the daemon, which interrupts other builds on the same instance. Fixed by rejecting such files above 16 MiB.
-
CVE-2026-93317
•
published on October 5, 2026
An unauthenticated attacker controlling a registry or OCI-layout blob source could provide blob contents that did not match the claimed digest. The resulting snapshot could be cached under that digest and reused by a later victim build, compromising build-input integrity.
-
CVE-2026-93316
•
published on October 5, 2026
If BuildKit daemon is started with --cdi-disabled it can lead to daemon panic when builds try to use CDI devices. This can happen maliciously or by accident.
-
CVE-2026-93308
•
published on September 17, 2026
A vulnerability was found in O-RAN-SC SMO OAM 2025-06-10. Affected by this vulnerability is an unknown functionality of the component VES Collector. Performing a manipulation results in allocation of resources. The attack may be initiated remotely. The exploit has been made public and could be used. The project was informed of the problem early through a bug report but has not responded yet.
-
CVE-2026-93307
•
published on September 17, 2026
A vulnerability has been found in O-RAN-SC SMO OAM 2025-06-10. Affected is an unknown function of the component VES Collector. Such manipulation of the argument additionalFields.padding leads to uncontrolled memory allocation. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through a bug report but has not responded yet.
-
CVE-2026-93303
•
published on September 25, 2026
The HT Contact Form – Drag & Drop Form Builder for WordPress plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via 'form_data' Rich Text Field via Draft Save/Resume in all versions up to, and including, 2.10.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires tricking a user into clicking an attacker-supplied draft resume URL, which the attacker constructs using the draft_key and access_token returned directly in the save response.
-
CVE-2026-93288
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data.
-
CVE-2026-93284
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: dma-unmap pages before handling migration errors
drm_pagemap_migrate_unmap_pages() relies on the pages array to determine
which pages require DMA unmapping. However,
drm_pagemap_migration_unlock_put_pages() clears the array as part of its
cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page
information if it is called afterward.
Call drm_pagemap_migrate_unmap_pages() before
drm_pagemap_migration_unlock_put_pages() so the pages array remains
valid during DMA unmapping.
-
CVE-2026-93283
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix device_register() error path
When device_register() fails in i3c_master_register_new_i3c_devs(),
put_device() is called to drop the reference taken by
device_register(). That drops the last reference, so the device's
release callback i3c_device_release() runs and frees the i3c_device.
Two problems follow from that:
i3c_device_release() does WARN_ON(i3cdev-desc), so it warns because
desc->dev->desc still points back at the descriptor. Clear it before
calling put_device().
After put_device() frees the i3c_device, desc->dev is left pointing at
freed memory, so clear desc->dev as well. That prevents, for example,
i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and
dereferencing it.
-
CVE-2026-93282
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed.
-
CVE-2026-93278
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash.
-
CVE-2026-93271
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status-rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
-
CVE-2026-93264
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix PBL chunk length computation
On register MR, when creating the PBL, if it's an indirect PBL we create
a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size
and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte
control buffer at the end of it holding the next chunk's pointer and its
length.
If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the
calculated last chunk length is wrongly computed as 0, even though that
chunk is fully populated with 510 real page pointers. This wrong length
is used both to DMA map the chunk and is propagated to the device,
causing the device to see the chunk as empty and reject the memory
registration.
Fix the calculation so it will be performed only if the number of pages
isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in
the above loop correctly.
Also prevent out-of-bounds reach in the chunks array in such scenario.
-
CVE-2026-93263
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
clk: eswin: Zero-initialize stack-allocated clk_init_data
eswin_clk_register_pll() and eswin_register_clkdiv() declare a struct
clk_init_data on the stack and only initialize some of its fields
(parent_data respectively parent_hws). clk_core_populate_parent_map()
checks parent_names first and parent_data second before falling back
to parent_hws, so leftover stack garbage in the uninitialized fields
hijacks parent resolution and the clk core dereferences a bogus
pointer:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000c
Oops [#1]
epc : __clk_register+0x31a/0x7f0
[ffffffff805dc774] __clk_register+0x31a/0x7f0
[] devm_clk_hw_register+0x2a/0x94
[] eswin_register_clkdiv+0x80/0xd0
[] eswin_clk_register_clks+0x162/0x1a0
[] eic7700_clk_probe+0x146/0x180
[] platform_probe+0x3c/0x7a
Observed on EIC7700 hardware (with the driver backported to a 6.17
tree); whether the bug triggers depends entirely on what the stack
happens to contain when the registration helpers run.
Zero-initialize both structures.
-
CVE-2026-93261
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Fix NULL pointer dereference in __lock_set_class()
register_lock_class() can return NULL when the lock class pool is
exhausted, graph_lock() fails, or key validation fails. However,
__lock_set_class() uses the return value directly in pointer arithmetic
without a NULL check:
class = register_lock_class(lock, subclass, 0);
hlock-class_idx = class - lock_classes;
If class is NULL, this computes a wild offset that corrupts
hlock->class_idx. The subsequent reacquire_held_locks() call will
invoke hlock_class() with this corrupted index, leading to a NULL or
out-of-bounds pointer dereference.
Add the missing NULL check, consistent with how __lock_acquire() already
handles this case at the same call site.
-
CVE-2026-93257
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
block: handle nogenerate/noverify properly in fs-integrity
Check the BIP_CHECK flags before generating or verifying PI information,
otherwise this can be incorrectly called for non-PI metadata and
cause generation of incorrect metadata and crashed in the verification
handler.
The new behavior matches that of the block layer auto-generated
metadata.
-
CVE-2026-93255
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock
[FALSE ALERTS]
There is a bug report that the warning inside
invalidate_and_check_btree_folios() got triggered during btrfs/298:
BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2
BTRFS info (device sdd): using crc32c checksum algorithm
BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices
BTRFS error (device sdd): failed to read chunk tree: -2
------------[ cut here ]------------
WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993
CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full)
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
Call trace:
invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P)
open_ctree+0x1f50/0x23b0 [btrfs]
btrfs_get_tree+0x89c/0xc48 [btrfs]
vfs_get_tree+0x30/0x110
vfs_cmd_create+0x58/0xe8
__arm64_sys_fsconfig+0x39c/0x518
invoke_syscall.constprop.0+0x48/0x120
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x50/0x310
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5
[CAUSE]
In that invalidate_and_check_btree_folios() we wait for the eb to finish
its read, then check if it's only held by us and the btree inode.
If not, then do a warning as it may be still held, and could cause
problems.
But there is a small window where the check can lead to false alerts:
Thread A (Read endio) | Thread B (Unmount)
----------------------------------+-------------------------------------
end_bbio_meta_read() |
| The eb has one extra ref held |
| by the reader, and has |
| EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios()
| | |
|- clear_extent_buffer_reading() | |
| | |- wait_on_bit_io();
| | | The EXTENT_BUFFER_READING flag is
| | | cleared
| | |- if (refcount_read(eb-refs) > 2)
| | The eb is held by the read, us
| | and btree inode, thus it
| | will trigger the warning
|- free_extent_buffer() |
[FIX]
Introduce a helper, free_extent_buffer_clear_reading().
If the new parameter, @clear_reading, is set, we will hold the spinlock
at the beginning of free_extent_buffer_clear_reading() to make sure the
EXTENT_BUFFER_READING flag is cleared inside the same critical section
of decreasing refs.
Now free_extent_buffer() will just call
free_extent_buffer_clear_reading() with @clear_reading set to false, so
no behavior change.
But for end_bbio_meta_read(), it will not clear_extent_buffer_reading()
directly, but pass @clear_reading as true.
Then inside invalidate_and_check_btree_folios(), hold the refs_lock
before reading refs.
So that we eliminate the race window completely.