-
CVE-2026-93282
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed.
-
CVE-2026-93278
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash.
-
CVE-2026-93271
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status-rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
-
CVE-2026-93264
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix PBL chunk length computation
On register MR, when creating the PBL, if it's an indirect PBL we create
a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size
and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte
control buffer at the end of it holding the next chunk's pointer and its
length.
If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the
calculated last chunk length is wrongly computed as 0, even though that
chunk is fully populated with 510 real page pointers. This wrong length
is used both to DMA map the chunk and is propagated to the device,
causing the device to see the chunk as empty and reject the memory
registration.
Fix the calculation so it will be performed only if the number of pages
isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in
the above loop correctly.
Also prevent out-of-bounds reach in the chunks array in such scenario.
-
CVE-2026-93263
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
clk: eswin: Zero-initialize stack-allocated clk_init_data
eswin_clk_register_pll() and eswin_register_clkdiv() declare a struct
clk_init_data on the stack and only initialize some of its fields
(parent_data respectively parent_hws). clk_core_populate_parent_map()
checks parent_names first and parent_data second before falling back
to parent_hws, so leftover stack garbage in the uninitialized fields
hijacks parent resolution and the clk core dereferences a bogus
pointer:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000c
Oops [#1]
epc : __clk_register+0x31a/0x7f0
[ffffffff805dc774] __clk_register+0x31a/0x7f0
[] devm_clk_hw_register+0x2a/0x94
[] eswin_register_clkdiv+0x80/0xd0
[] eswin_clk_register_clks+0x162/0x1a0
[] eic7700_clk_probe+0x146/0x180
[] platform_probe+0x3c/0x7a
Observed on EIC7700 hardware (with the driver backported to a 6.17
tree); whether the bug triggers depends entirely on what the stack
happens to contain when the registration helpers run.
Zero-initialize both structures.
-
CVE-2026-93261
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Fix NULL pointer dereference in __lock_set_class()
register_lock_class() can return NULL when the lock class pool is
exhausted, graph_lock() fails, or key validation fails. However,
__lock_set_class() uses the return value directly in pointer arithmetic
without a NULL check:
class = register_lock_class(lock, subclass, 0);
hlock-class_idx = class - lock_classes;
If class is NULL, this computes a wild offset that corrupts
hlock->class_idx. The subsequent reacquire_held_locks() call will
invoke hlock_class() with this corrupted index, leading to a NULL or
out-of-bounds pointer dereference.
Add the missing NULL check, consistent with how __lock_acquire() already
handles this case at the same call site.
-
CVE-2026-93257
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
block: handle nogenerate/noverify properly in fs-integrity
Check the BIP_CHECK flags before generating or verifying PI information,
otherwise this can be incorrectly called for non-PI metadata and
cause generation of incorrect metadata and crashed in the verification
handler.
The new behavior matches that of the block layer auto-generated
metadata.
-
CVE-2026-93255
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock
[FALSE ALERTS]
There is a bug report that the warning inside
invalidate_and_check_btree_folios() got triggered during btrfs/298:
BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2
BTRFS info (device sdd): using crc32c checksum algorithm
BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices
BTRFS error (device sdd): failed to read chunk tree: -2
------------[ cut here ]------------
WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993
CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full)
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
Call trace:
invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P)
open_ctree+0x1f50/0x23b0 [btrfs]
btrfs_get_tree+0x89c/0xc48 [btrfs]
vfs_get_tree+0x30/0x110
vfs_cmd_create+0x58/0xe8
__arm64_sys_fsconfig+0x39c/0x518
invoke_syscall.constprop.0+0x48/0x120
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x50/0x310
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5
[CAUSE]
In that invalidate_and_check_btree_folios() we wait for the eb to finish
its read, then check if it's only held by us and the btree inode.
If not, then do a warning as it may be still held, and could cause
problems.
But there is a small window where the check can lead to false alerts:
Thread A (Read endio) | Thread B (Unmount)
----------------------------------+-------------------------------------
end_bbio_meta_read() |
| The eb has one extra ref held |
| by the reader, and has |
| EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios()
| | |
|- clear_extent_buffer_reading() | |
| | |- wait_on_bit_io();
| | | The EXTENT_BUFFER_READING flag is
| | | cleared
| | |- if (refcount_read(eb-refs) > 2)
| | The eb is held by the read, us
| | and btree inode, thus it
| | will trigger the warning
|- free_extent_buffer() |
[FIX]
Introduce a helper, free_extent_buffer_clear_reading().
If the new parameter, @clear_reading, is set, we will hold the spinlock
at the beginning of free_extent_buffer_clear_reading() to make sure the
EXTENT_BUFFER_READING flag is cleared inside the same critical section
of decreasing refs.
Now free_extent_buffer() will just call
free_extent_buffer_clear_reading() with @clear_reading set to false, so
no behavior change.
But for end_bbio_meta_read(), it will not clear_extent_buffer_reading()
directly, but pass @clear_reading as true.
Then inside invalidate_and_check_btree_folios(), hold the refs_lock
before reading refs.
So that we eliminate the race window completely.
-
CVE-2026-93254
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
Currently, when exiting to kernel mode, we attempt involuntary
preemption. The preemption logic expects IRQs to be disabled, which is
why we call local_irq_disable() before attempting preemption.
However, depending on the context, local_irq_disable() may be
unnecessary:
- __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so
local_irq_disable() is redundant.
- irqentry_exit_to_kernel_mode_preempt() immediately returns when
exiting from an NMI-like context, so calling local_irq_disable()
beforehand is unnecessary work.
Furthermore, it confuses the pNMI state tracking when we are in a
context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set
in the PMR, leading to a warning when
CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y:
WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805
CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY
pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63)
lr : el1_abort (arch/arm64/kernel/entry-common.c:323)
pmr: 000000f0
Call trace:
arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P)
el1_abort (arch/arm64/kernel/entry-common.c:323)
el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449)
el1h_64_sync (arch/arm64/kernel/entry.S:589)
[...]
Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and
dispatch parts so that we can avoid this extra work where it is not
needed and avoid breaking the pNMI tracking logic.
-
CVE-2026-93253
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched/isolation: Defer freeing of cpumask memblock memory to initcall
When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock:
warn when freeing reserved memory before memory map is initialized"),
the following warning was hit when there was a "nohz_full" kernel boot
parameter.
Cannot free reserved memory because of deferred initialization of the memory map
WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0
:
Call Trace:
TASK
memblock_phys_free+0xcb/0x100
housekeeping_init+0x14c/0x170
start_kernel+0x207/0x450
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xda/0xe0
common_startup_64+0x13e/0x141
IOW, we shouldn't free memblock allocated memory so early
in the boot process when memory map isn't fully initialized in
deferred_init_memmap().
Fix it by saving the housekeeping cpumask memblock memory to be
freed into a llist free list in housekeeping_init() and add a new
housekeeping_late_init() helper to defer the actual freeing of memblock
memory to when initcall's are being processed. The cpumask memblock
memory is treated as a llist_node with the size of a "long" type which
is also smallest cpumask size that can be allocated.
The non-atomic version of the llist APIs are used as there is no
contention.
This commit depends on the presence of commit 7c2eee9c1367 ("memblock:
don't touch memblock arrays when memblock_free() is called late")
to prevent a KASAN UAF bug report [1].
[1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/
-
CVE-2026-93248
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19)
-
CVE-2026-93242
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb()
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex-entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().
-
CVE-2026-93240
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
memcg: make the v1 soft limit knob inert
The v1 soft limit has been deprecated since v6.12 and nobody has reported
depending on it. Start the removal by decoupling the interface from the
implementation: keep memory.soft_limit_in_bytes, but ignore writes to it
and always report the maximum value on read similar to what
memory.kmem.limit_in_bytes already does.
Writes are still parsed, so malformed input keeps returning -EINVAL. The
knob now also behaves the same everywhere: it used to return -EOPNOTSUPP
on PREEMPT_RT, where soft limit reclaim has always been disabled.
This also fixes the syzbot report linked below. Soft limit reclaim is the
only caller that runs shrink_lruvec() from kswapd against a specific
memcg, so it is the only way to reach lru_gen_shrink_lruvec() and in turn
set_mm_walk(), which warns when called from kswapd.
-
CVE-2026-93239
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value.
-
CVE-2026-93234
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate TV mode names before creating enum property
The GUD protocol returns TV mode names as fixed-size
GUD_CONNECTOR_TV_MODE_NAME_LEN entries and requires each name to be
NUL-terminated.
gud_connector_add_tv_mode() currently passes each fixed-size entry
directly to drm_mode_create_tv_properties_legacy(), which eventually
reaches drm_property_add_enum() and strlen(). If a device returns an
entry without a terminating NUL byte, strlen() reads past the end of
the slot and can run beyond the allocated buffer, triggering an
out-of-bounds read.
Validate that each returned TV mode name contains a NUL terminator
within its fixed-size slot before passing it to the DRM property code.
If a malformed entry is found, reject the device response with -EIO.
This fixes the out-of-bounds read without changing the handling of
valid devices, and avoids silently truncating malformed protocol data.
-
CVE-2026-93231
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
lockd: fix swapped arguments in nlmsvc_match_ip()
When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip,
nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server
sockaddr as the opaque @data argument:
nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL);
The match callback is later invoked from nlm_traverse_locks() as:
match(lockhost, host);
where the first argument is the nlm_host that owns the lock, and the
second argument is the @data that was originally passed down (here the
server sockaddr). This is the convention every other match callback
relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()):
arg1 is the real nlm_host, arg2 is the caller-supplied reference value.
nlmsvc_match_ip() has had these two arguments reversed ever since the
unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd:
unlock lockd locks associated with a given server ip"):
return rpc_cmp_addr(nlm_srcaddr(host), datap);
Here @host is actually the server sockaddr, so nlm_srcaddr(host)
dereferences a struct sockaddr as a struct nlm_host and reads garbage
at the offset of h_srcaddr; meanwhile @datap is actually the lock
owner's nlm_host but is compared as a sockaddr. As a result the
comparison practically never matches and locks are not released for the
requested IP.
Swap the arguments so the lock owner's source address is compared
against the requested server address:
return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host);
[ cel: fix the misleading typedef parameter names too ]
-
CVE-2026-93230
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier
Gigantic bootmem HugeTLB pages are currently initialized from
hugetlb_init(), but page_alloc_init_late() runs earlier and walks
pageblocks to determine zone contiguity.
If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can
observe still-uninitialized struct pages through
__pageblock_pfn_to_page(). This may not trigger an immediate failure, but
it can make set_zone_contiguous() compute the wrong zone contiguity state.
If extra poisoned-page checks are added in this path, such as
PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot
panic.
Initialize gigantic bootmem HugeTLB struct pages from
page_alloc_init_late(), before zone contiguity is evaluated, so later page
allocator setup only sees valid struct page state. This also makes the
initialization order more natural, as struct pages should be initialized
before later code inspects them.
-
CVE-2026-93215
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
cdx: Fix double free when sysfs file creation fails
In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code
frees res_attr but doesn't set cdx_dev-res_attr[num] to NULL. This
leaves a dangling pointer in the array. Then cdx_destroy_res_attr()
frees the already-freed memory. Fix the double free by initializing
cdx_dev->res_attr[num] after sysfs_create_bin_file() completes.
-
CVE-2026-93204
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: atomically update mac addresses
When a MAC address is updated in batadv_dat_entry_add(), it is done using a
simple copy function. A parallel reader might only see parts of this
update. In worst case, the reader is transporting the half updated MAC
address over the network or is creating an ARP response using it -
poisoning the ARP cache.
atomic64_t can be used to store the 48 bit of a mac address. A reader will
then either see the old mac address or the new one - never a mixture of
both.
-
CVE-2026-93203
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change