-
CVE-2026-93153
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/bng_re: return a timeout when firmware responses stall
__wait_for_resp() documents that it returns a non-zero error when a
firmware command does not complete, and bng_re_rcfw_send_message() already
marks the firmware as stalled when the helper returns -ENODEV.
However, the helper ignores wait_event_timeout() expiry. If the response
slot remains in use after the timeout and after the polled CREQ service
attempt, the loop starts another full timeout period and can repeat
forever.
Return -ENODEV after a timed out wait that still has no response. The
existing caller then marks FIRMWARE_STALL_DETECTED and returns
-ETIMEDOUT to the command issuer.
-
CVE-2026-93152
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Use acquire/release for queue enabled state
apple_nvme_init_queue() initializes queue state and then marks the queue
enabled. The interrupt and request paths check enabled before using that
queue state.
The old wmb() after WRITE_ONCE(enabled, true) does not publish the
earlier initialization before enabled becomes visible. Use a release store
when enabling the queue and acquire loads when testing it.
Although the shutdown-side enabled accesses are not used for publishing
queue initialization, use helpers for them as well for consistency.
-
CVE-2026-93150
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Make nr_deadline_tasks an atomic_t
The nr_deadline_tasks variable in the cpuset structure was introduced by
commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task
in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks
can currently be modified by inc_dl_tasks_cs() under rq-lock and
by cpuset_attach() under cpuset_mutex. So if both updates happen
simultaneously, the nr_deadline_tasks variable can be corrupted leading
to incorrect operations down the road.
Fix that by changing its type to atomic_t so that nr_deadline_tasks
are always atomically updated. This fix patch is a low hanging fruit.
It can handle some of the races between a concurrent sched_setscheduler()
and cpuset_can_attach()/cpuset_attach() calls, but not all of them like
the other issue raised by sashiko [2]. This will be handled hopefully
in a future follow up patch.
[1] https://sashiko.dev/#/patchset/20260626181923.133658-1-longman%40redhat.com
[2] https://sashiko.dev/#/patchset/20260630033344.352702-1-longman%40redhat.com
-
CVE-2026-93149
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: avoid NULL skb in stop queue drain
mac80211_hwsim_stop() drops any frames left in data-pending. The loop
currently checks skb_queue_empty() and then dequeues separately.
That split is racy with TX status handling, which can remove a pending
frame under the queue lock. If the last entry is removed after the empty
check, skb_dequeue() returns NULL and the stop path passes that NULL skb
to ieee80211_free_txskb().
Use skb_dequeue() as the loop condition instead. The dequeue result is the
object that stop owns and frees, and a concurrent status completion that
empties the queue simply makes the loop terminate.
-
CVE-2026-93140
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()`
because the buffer is not marked uptodate, even though its in-memory
contents are valid and are about to be overwritten.
To prevent this spurious warning, unconditionally set the `BH_Uptodate`
flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and
`udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and
matches the workaround previously applied to `udf_close_lvid()` in commit
853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty").
Extending this workaround ensures consistent behavior across all LVID
updates.
Buffer I/O error on dev loop0, logical block 128, lost sync page write
------------[ cut here ]------------
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087
...
Call Trace:
TASK
udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078
udf_reconfigure+0x336/0x540 fs/udf/super.c:679
reconfigure_super+0x232/0x8f0 fs/super.c:1080
vfs_cmd_reconfigure fs/fsopen.c:268 [inline]
vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297
__do_sys_fsconfig fs/fsopen.c:463 [inline]
__se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
-
CVE-2026-93139
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC
The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries
uninitialized for multi-XCC GPUs. This causes null pointer dereferences
when accessing arrays indexed by XCC ID = 2. Extend the loop to cover
all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC
arrays.
-
CVE-2026-93135
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn-imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic.
-
CVE-2026-93134
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
printk: Fix possible console use-after-free
When emitting a record via legacy printing, it is possible that a handover
to another legacy printing context occurs. When a context has performed a
handover, the console SRCU read lock is released and the pointer to the
console struct might now be invalid. Therefore, after calling
nbcon_legacy_emit_next_record() or console_emit_next_record(), it is
necessary to check if a handover occurred _before_ further @con usage.
Sashiko pointed out that console_flush_one_record() was not doing this.
In console_flush_one_record(), after emitting a record, move the further
usage of @con after the handover check.
-
CVE-2026-93133
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails.
-
CVE-2026-93126
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference.
-
CVE-2026-93123
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port-tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo.
-
CVE-2026-93121
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths
The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation
failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which
calls dma_fence_put() on the fence. However, at that point the fence has
only been kmalloc'd — dma_fence_init() has not been called yet, so the
refcount and the fence ops are uninitialized. Calling dma_fence_put() on
such an object leads to undefined behavior.
Use kfree() instead, since the fence is just a plain allocation at this
stage, and rename the label to err_fence_free to reflect the actual
cleanup action.
-
CVE-2026-93120
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions.
-
CVE-2026-93467
•
published on September 18, 2026
The OAKlouds developed by HGiga has a Insecure Deserialization vulnerability. Unauthenticated remote attackers can execute arbitrary code on the server by sending maliciously crafted serialized content.
-
CVE-2026-93463
•
published on September 30, 2026
A cross-site scripting vulnerability via script validation bypass exists in baserCMS. If this vulnerability is exploited, an arbitrary script may be executed in the user's web browser.
-
CVE-2026-93451
•
published on September 17, 2026
snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in typed Snappy.uncompress*Array methods that allocate output arrays by dividing uncompressed length by element size but pass the undivided length to native code. Attackers controlling compressed input can cause misaligned length values to write past array bounds with attacker-controlled bytes, corrupting heap memory.
-
CVE-2026-93449
•
published on October 7, 2026
IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper control of code generation.
-
CVE-2026-93446
•
published on October 20, 2026
Incomplete cleanup vulnerability in Apache Tomcat could cause TLS 1.3 connections to fail intermittently.
This issue affects Apache Tomcat: from 11.0.0-M21 through 11.0.26, from 10.1.25 through 10.1.60, from 9.0.90 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.
-
CVE-2026-93434
•
published on October 27, 2026
An XPath injection vulnerability in WatchGuard Fireware OS's SSH authentication process allows a remote, unauthenticated attacker with access to the management SSH interface to extract sensitive configuration data by submitting a specially crafted request.
-
CVE-2026-93425
•
published on September 24, 2026
Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the patch.readRepoDirectories tRPC procedure passes the user-controlled repoPath value from apps/dokploy/server/api/routers/patch.ts into a shell command in packages/server/src/services/patch-repo.ts without safe argument quoting. An authenticated organization member with service:read permission can inject shell metacharacters into repoPath and execute arbitrary commands through child_process.exec as root in the Dokploy container. The supplied service identifier is used only to resolve the server and does not constrain repoPath. Because the standard deployment mounts /var/run/docker.sock, container-root command execution can be used to control Docker and compromise the host and its managed applications. This issue is fixed in version 0.29.13.