-
CVE-2026-93294
•
published on October 13, 2026
A user with query access to an Azure Monitor data source can use its resource proxy to call Azure Resource Manager APIs beyond those Grafana needs, with the data source's Azure identity (unintended proxy). The impact is bounded by the Azure role granted to that identity.
-
CVE-2026-93290
•
published on September 24, 2026
Omni C20 uses hard-coded credentials that could allow an attacker to monitor log files to obtain credentials to access information like mapping data.
-
CVE-2026-93289
•
published on September 24, 2026
The affected products are vulnerable to command injection attack that could allow an unauthenticated attacker to execute system commands during the pairing process.
-
CVE-2026-93281
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix HE extended capability length check
rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability
byte 10, but rejects only datalen values below 10. Byte 10 requires at
least 11 bytes.
Require datalen = 11 before reading data[10].
-
CVE-2026-93280
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed.
-
CVE-2026-93279
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds.
-
CVE-2026-93269
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix circular lock dependency in ext4_ext_migrate
Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a
circular lock dependency between s_writepages_rwsem and sb_internal
(freeze protection).
The deadlock scenario:
CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount)
---- ----
ext4_ext_migrate()
ext4_writepages_down_write()
s_writepages_rwsem (write)
ext4_evict_inode()
sb_start_intwrite() [sb_internal]
...
ext4_writepages()
s_writepages_rwsem (read) [BLOCKED]
iput(tmp_inode)
ext4_evict_inode()
sb_start_intwrite() [BLOCKED]
The tmp_inode is a temporary inode with nlink=0 created solely for
building the extent tree. Its eviction does not require
s_writepages_rwsem protection, so deferring iput() until after
releasing the rwsem is safe.
-
CVE-2026-93266
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
arm64: RSI: fix field-spanning write warning in attestation token init
The challenge is passed in registers a1 through a8. However, copying to
®s.a1 makes FORTIFY treat the destination as the single a1 field,
resulting in a field-spanning write warning. [1]
Overlay the SMCCC register structure with an RSI-specific argument
layout and copy the challenge into an explicit 64-byte array. This keeps
the existing a1-a8 argument encoding while giving the copy a correctly
sized destination object.
[1]
memcpy: detected field-spanning write (size 64) of single field "®s.a1" at ./arch/arm64/include/asm/rsi_cmds.h:119 (size 8)
WARNING: ./arch/arm64/include/asm/rsi_cmds.h:119 at rsi_attestation_token_init+0xdc/0xf8 [arm_cca_guest], CPU#0: cat/3314
-
CVE-2026-93258
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case.
-
CVE-2026-93252
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi-ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary.
-
CVE-2026-93250
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
- vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
-
CVE-2026-93249
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
-
CVE-2026-93244
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX.
-
CVE-2026-93232
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix boot panic with CONFIG_DEBUG_VM and HVO bootmem pages
Patch series "mm: Refactor bootmem gigantic hugepage allocation", v4.
This series is split out from the earlier larger series "mm: Generalize
HVO for HugeTLB and device DAX" [1]. It collects the first 19 patches of
that series as a standalone set of fixes and preparatory cleanups around
bootmem HugeTLB handling, sparse initialization ordering, and related
vmemmap setup.
The first patches fix a few bugs found while reviewing the existing code,
including incorrect bootmem HVO handling, wrong vmemmap registration
arguments, a powerpc compound-vmemmap tracking bug, and too-late
initialization of gigantic bootmem HugeTLB struct pages.
The rest of the series reorders early memory initialization so the
relevant zone state is available before sparse and HugeTLB boot-time setup
runs, then simplifies the remaining bootmem gigantic hugepage allocation
path and removes code made obsolete by that rework.
At a high level:
- patches [1-4] fix boot-time and arch-specific bugs
- patches [5-12] reorder and simplify sparse/mm/hugetlb early init
- patches [13-19] refactor bootmem gigantic hugepage allocation and
remove obsolete helpers and state
This patch (of 19):
Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") switched
HVO to reuse per-zone shared tail pages from zone-vmemmap_tails[].
Those shared tail pages were initialized in hugetlb_vmemmap_init(), but
bootmem HugeTLB folios are prepared earlier from
gather_bootmem_prealloc(). With hugetlb_free_vmemmap=on,
prep_and_add_bootmem_folios() can access pageblock flags on bootmem
HugeTLB pages whose mirrored tail struct pages already point to the shared
tail page. On CONFIG_DEBUG_VM kernels, get_pfnblock_bitmap_bitidx() then
dereferences the still-uninitialized shared tail page and can panic during
boot.
Initialize zone->vmemmap_tails[] from gather_bootmem_prealloc(), before
bootmem HugeTLB folios are processed, and drop the later initialization
from hugetlb_vmemmap_init().
This bug only affects CONFIG_DEBUG_VM kernels, where the relevant
assertion is evaluated.
-
CVE-2026-93227
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn
With CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, deferred_grow_zone()
initializes struct pages early in boot to satisfy an allocation.
With a large CMA reservation in place, the ranges deferred_init_memmap()
finds may not add up to the allocation it was asked for, and the function
ends up initializing the memory map of the entire zone and still falls
short.
That is fine in itself: the function accounts for it and leaves the
caller to decide whether it now has enough memory.
However, the update of pgdat-first_deferred_pfn that tracks where
uninitialized memory map starts could overflow.
If the node's RAM end is not aligned on PAGES_PER_SECTION boundaries and
some deferred struct pages were initialized, pgdat->first_deferred_pfn
would point past the end of the node's memory.
deferred_init_memmap() later picks up from pgdat->first_deferred_pfn and
hits a BUG_ON(), because it expects a pfn within its node.
For example, when running a kernel with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
and CONFIG_CMA=y using the following qemu command line
qemu-system-x86_64 -enable-kvm -m 8032M -kernel bzImage \
-append "nokaslr cma=4768M@0x100000000"
the kernel panics:
kernel BUG at mm/mm_init.c:2131!
CPU: 3 UID: 0 PID: 36 Comm: pgdatinit0 Not tainted 7.2.0-rc6 #1
RIP: 0010:deferred_init_memmap+0x1b8/0x1c0
RAX: 0000000000236000 R13: 0000000000238000
Call Trace:
kthread+0xdf/0x120
ret_from_fork+0x187/0x250
Make sure that the update of pgdta->first_deferred_pfn does not overflow
when the entire zone's (and therefore node's) memory map is initialized.
[rppt: massaged the changelog]
-
CVE-2026-93223
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
staging: media: tegra-video: fix of_node_put() on VIP parse errors
tegra_vip_channel_of_parse() initializes np from dev-of_node without
taking a reference, but its error paths drop one through the
err_node_put label. This underflows the refcount of the VIP device's
OF node when endpoint parsing fails on a malformed device tree.
The only reference the function takes on np is the success-path
of_node_get() stored in vip->chan.of_node, and that one is already
released by the tegra_vip_init() error path and by tegra_vip_exit().
Return errors directly instead of jumping to the bogus cleanup label.
-
CVE-2026-93219
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sun4i: Advertise a real minimum delta
sun4i_clkevt_next_event() compensates for the timer stop/start
synchronization delay by programming evt - TIMER_SYNC_TICKS into the
hardware interval register. The clockevent device currently advertises
TIMER_SYNC_TICKS as min_delta_ticks, so the clockevents core is allowed
to call set_next_event() with evt == TIMER_SYNC_TICKS.
That programs a zero-tick interval. With oneshot/highres/nohz timer
operation this can leave the next event stuck, which was observed as a
boot hang on Allwinner D1 after the clockevents core started reusing
forced minimum-delta events.
Advertise one extra tick instead, so the smallest event accepted by the
core still programs at least one hardware tick after the synchronization
compensation.
-
CVE-2026-93209
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb
BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:
bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND --
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk
The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.
req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.
This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.
[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/
-
CVE-2026-93207
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata-clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer.
-
CVE-2026-93196
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvdimm: virtio_pmem: refcount requests for token lifetime
KASAN reports slab-use-after-free in __wake_up_common():
BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160
Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux
1.17.0-2-2 04/01/2014
Call Trace:
IRQ
dump_stack_lvl+0x6d/0xb0
print_report+0x170/0x4e2
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __virt_addr_valid+0x1dc/0x380
kasan_report+0xbc/0xf0
? __wake_up_common+0x114/0x160
? __wake_up_common+0x114/0x160
__wake_up_common+0x114/0x160
? __pfx__raw_spin_lock_irqsave+0x10/0x10
__wake_up+0x36/0x60
virtio_pmem_host_ack+0x11d/0x3b0
? sched_balance_domains+0x29f/0xb00
? __pfx_virtio_pmem_host_ack+0x10/0x10
? _raw_spin_lock_irqsave+0x98/0x100
? __pfx__raw_spin_lock_irqsave+0x10/0x10
vring_interrupt+0x1c9/0x5e0
? __pfx_vp_interrupt+0x10/0x10
vp_vring_interrupt+0x87/0x100
? __pfx_vp_interrupt+0x10/0x10
__handle_irq_event_percpu+0x17f/0x550
? __pfx__raw_spin_lock+0x10/0x10
handle_irq_event+0xab/0x1c0
handle_fasteoi_irq+0x276/0xae0
__common_interrupt+0x65/0x130
common_interrupt+0x78/0xa0
virtio_pmem_host_ack() wakes a request that has already been freed by the
submitter.
This happens when the request token is still reachable via the virtqueue,
but virtio_pmem_flush() returns and frees it.
Fix the token lifetime by refcounting struct virtio_pmem_request.
virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an
extra reference once the request is queued. The completion path drops the
virtqueue reference, and the submitter drops its reference before
returning.