-
CVE-2026-93105
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req-src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data().
-
CVE-2026-93088
•
published on September 22, 2026
SGLang's multimodal generation runtime is vulnerable to unauthenticated arbitrary code execution because the disaggregated-diffusion orchestrator's DiffusionServer binds an unauthenticated ZeroMQ ROUTER socket to a network interface and passes the final frame of received multipart messages directly to pickle.loads() before any validation occurs.
-
CVE-2026-93085
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Reject out of range DT protocol IDs
SCMI protocol IDs carried in message headers are limited by
MSG_PROTOCOL_ID_MASK. The DT parsing paths noticed protocol IDs
outside that range, but only logged an error and then kept processing
the invalid value.
That lets a malformed 32-bit DT reg value reach helpers which take a u8
protocol ID, where it can be truncated and/or treated as a different
protocol.
For channel setup, two different out-of-range values can also be used as
distinct IDR keys while aliasing the generated SCMI protocol identity.
Skip DT protocol nodes whose reg value does not fit the SCMI protocol ID
field before setting up channels or creating protocol devices.
-
CVE-2026-93080
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix transport device teardown lookup
SCMI transport devices are deliberately excluded from normal SCMI bus
matching so protocol drivers cannot bind to the internal transport
children. However, scmi_device_destroy() uses the same protocol/name
lookup to find devices that must be unregistered during channel teardown.
Split the match helper so driver matching still skips transport devices,
while explicit child lookup can find them for teardown. Use a shared
transport-device name prefix macro for both matching and name generation.
Since transport-device names are derived from direction and protocol ID,
reject duplicate protocol channel setup before creating or finding a
transport device. This prevents malformed firmware with duplicate
protocol child nodes from reusing an existing transport device and then
destroying it when the duplicate IDR insertion fails.
-
CVE-2026-93078
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Set Features output buffer smaller than the header
cxlctl_set_feature() sizes its output buffer from the user's
fwctl_rpc.out_len but never checks it is large enough to hold even the
fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns
ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent
rpc_out-size = 0 then writes through the poison pointer.
Reject requests whose output buffer can't hold the response header,
before allocating. The Set Feature reply carries no payload, so the
header is all that is required.
-
CVE-2026-93075
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear pgmap ops and owner on unbind
fsdev_dax_probe() sets pgmap-ops = &fsdev_pagemap_ops and
pgmap->owner = dev_dax, but nothing ever clears them. For a dynamic
device the pgmap is devm-allocated and freed on unbind, so this is
harmless. For a static device the pgmap is the shared, long-lived one
owned by the dax bus (kill_dev_dax() only NULLs dev_dax->pgmap for the
non-static case), and device.c's probe sets only pgmap->type, never
clearing ops/owner.
So after fsdev unbinds a static device the stale fsdev_pagemap_ops
survives on the shared pgmap. If the device is then rebound to
device_dax (MEMORY_DEVICE_GENERIC, which installs no ->memory_failure),
or the fsdev_dax module is unloaded, a subsequent memory_failure on that
pgmap dispatches through the stale -- and possibly freed -- handler.
Register a devm action that clears pgmap->ops and pgmap->owner on unbind,
symmetric with setting them at probe, so the pgmap carries no fsdev state
once fsdev is detached.
-
CVE-2026-93066
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Take cpa_lock around large-page collapse
Loading and unloading modules concurrently on several CPUs on a KASAN
build, with a short delay injected at the CPA page-table lookup to
widen the window, faults within minutes:
BUG: KASAN: use-after-free in __change_page_attr+0x7cc/0x7e0
Write of size 8 at addr ffff888181139718 by task modprobe
...
The buggy address belongs to the physical page:
pfn:0x181139 ... page_type: f2(table)
cpa_collapse_large_pages() rebuilds a leaf PMD from its 4K PTEs and
frees the old PTE-table pages, while __change_page_attr() fetches a
PTE pointer from a lockless lookup_address_in_pgd_attr() and writes
it with set_pte_atomic() only later. When module text is served from
a shared large ROX mapping the two run on the same PMD:
CPU A (module load) CPU B (module finalize)
------------------- -----------------------
execmem_make_temp_rw
set_memory_nx
__change_page_attr
split 2M - 4K table P
kpte = &P[i] (lockless)
execmem_restore_rox
set_memory_rox (CPA_COLLAPSE)
cpa_collapse_large_pages
rebuild leaf PMD
flush_tlb_all
pagetable_free(P)
set_pte_atomic(kpte, ...)
-> writes into freed P
P is a page-table page (page_type: table), reused at once, so the
write corrupts whatever got the page next: a bad-pte or bad-page
splat, or a fatal fault once P has been turned into read-only text.
The flush_tlb_all() before the free does not close this: its IPI only
serializes against page-table walkers that run with interrupts off
(e.g. GUP-fast); the walk in __change_page_attr() runs with interrupts
on, so nothing stops it from holding a stale pointer into P.
Serialize the collapse - the PMD rebuild, TLB flush and PTE-table
free - under cpa_lock, the same lock __change_page_attr() now takes
unconditionally since commit ("x86/mm/pat: stop gating cpa_lock on
debug_pagealloc_enabled()"), so a concurrent walker can no longer
hold a pointer into a table the collapse is about to free.
-
CVE-2026-93061
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o-fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnprintf(), which returns the number of bytes
actually written.
-
CVE-2026-93059
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix task_struct reference leak in recover_worker
get_pid_task() increments the task reference count, but the
corresponding put_task_struct() was missing in the else branch,
leaking a reference on every GPU hang recovery.
Patchwork: https://patchwork.freedesktop.org/patch/730662/
-
CVE-2026-93052
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers.
-
CVE-2026-93045
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range.
-
CVE-2026-93042
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires.
-
CVE-2026-93037
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx-txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2026-93017
•
published on October 8, 2026
The `insights-operator-gather` ClusterRole grants the operator's service account read access to secrets in the core API group with no namespace or resourceNames restriction — therefore, access to every secret in every namespace in the cluster.
Ref: https://github.com/openshift/insights-operator/blob/8f15e3157ff09f54ab22801f5b21da35a195cc6d/manifests/03-clusterrole.yaml#L368-L373
```
- apiGroups:
- ""
resources:
- secrets
verbs:
- get
- list
```
By spawning a pod with the gather service account mounted, an attacker will be able to access any secret in any namespace.
```
spec:
serviceAccountName:"gather"
```
-
CVE-2026-93013
•
published on September 17, 2026
RAGFlow through 0.27.2 contains a path traversal vulnerability in the dev_insert_chunks_from_file and dev_insert_metadata_from_file endpoints that allows authenticated attackers to read arbitrary files by supplying absolute file paths in the file_path parameter. Attackers with valid access tokens can exploit missing path validation to read any file accessible to the service, with disclosure limited to files matching expected JSON structures that are then written to datasets.
-
CVE-2026-92997
•
published on October 21, 2026
The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not properly validate a parameter before using it as a column identifier in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks.
-
CVE-2026-92996
•
published on September 28, 2026
The Verge3D WordPress plugin from 4.1.0 through 4.13.0 does not verify with the payment provider that a payment was actually made, and does not check order ownership, allowing unauthenticated users to mark any order as paid.
-
CVE-2026-92995
•
published on September 27, 2026
The Verge3D Publishing and E-Commerce WordPress plugin through 4.13.0 does not restrict access to a file-download handler, allowing unauthenticated users to download the digital-goods files attached to any order without authorization.
-
CVE-2026-92994
•
published on September 30, 2026
The Verge3D Publishing and E-Commerce WordPress plugin before 4.13.1 does not validate the contents of files uploaded through its file storage feature and serves them back with an attacker-controlled content type, allowing unauthenticated attackers to store a file containing malicious JavaScript that executes in the browser of any user who opens it.
-
CVE-2026-92992
•
published on September 17, 2026
A security vulnerability has been detected in Dromara mayfly-go up to 1.11.5. The affected element is an unknown function of the file server/internal/ai/api/ai.go of the component AI Assistant. The manipulation leads to missing authorization. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The identifier of the patch is 74bcb926eb4f5f94e7681144d7bf2168a0ec7cde. Applying a patch is the recommended action to fix this issue. The whitelist bypass is one-token wide. Any compound command containing curl, wget or sed auto-runs without approval; approval is granted by the same session user (self-approval). This issue got fixed with a silent patch.