-
CVE-2026-93064
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised.
-
CVE-2026-93060
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: fix use after free on error path in a6xx_gpu_init()
The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points
to freed memory. Preserve the error code before freeing the memory to
avoid a use after free.
Patchwork: https://patchwork.freedesktop.org/patch/732275/
-
CVE-2026-93058
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/
-
CVE-2026-93057
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context
TX EQTR may run while devfreq gear scaling has quiesced the UFS
tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr()
and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct
reclaim is triggered, reclaim/writeback can depend on I/O to UFS
device. Because the queue is quiesced, this can cause deadlock.
Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all
allocations in the TX EQTR call tree, including:
- params-eqtr_record in ufshcd_tx_eqtr()
- eqtr_data in __ufshcd_tx_eqtr()
- params in ufs_qcom_get_rx_fom()
This is preferred over tagging individual call sites with GFP_NOIO, as it
automatically covers any future allocations added anywhere in the call tree
without requiring each caller to be aware of this constraint.
[mkp: fix label as suggested by Bart]
-
CVE-2026-93055
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
UDF symlink pathComponent header OOB read
udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header.
Validate that enough input remains for a complete pathComponent header
before accessing it. Reject malformed symlink data that would otherwise
make udf_pc_to_char() perform an out-of-bounds read.
-
CVE-2026-93046
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
software node: Fix software_node_get_reference_args() with index -1
The bounds check for the index passed to
software_node_get_reference_args() was failing when passed UINT_MAX,
this in turn would lead to an out of bound access in the property
array. Fix the bound check to also cover the UINT_MAX case.
-
CVE-2026-93043
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for gotox insn
The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which
is used for insn_array map. Thereafter, it would hit the BUG_ON() in
___bpf_prog_run() at run time.
[ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0)
[ 2.564557] ------------[ cut here ]------------
[ 2.565206] kernel BUG at kernel/bpf/core.c:2349!
[ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when insn_array map is used in the prog in
order to disallow interpreter fallback for gotox insn in
core.c::__bpf_prog_select_runtime().
-
CVE-2026-93040
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot.
-
CVE-2026-93012
•
published on September 21, 2026
Email::Sender::Transport::Sendmail versions before 2.602 for Perl allow arbitrary command execution on Windows sending a message whose envelope address reaches the shell in _sendmail_pipe.
On MSWin32 the envelope sender and every recipient go into a single command string, which open() passes to a shell. Every other platform gets the list form, which runs sendmail directly. When the caller supplies no envelope, Email::Sender::Simple takes the recipients from the To and Cc headers and the sender from the From header.
An attacker who controls one of those header addresses runs commands as the sending process.
-
CVE-2026-93010
•
published on October 29, 2026
A flaw was found in dnsmasq. When DHCP leasequery is enabled without listing allowed source addresses, the server does not check who sent the query. A host on the local network can request DHCP lease records and learn assigned addresses, MAC addresses, hostnames, and related lease metadata. The feature is off unless an administrator turns it on.
-
CVE-2026-93008
•
published on October 29, 2026
A flaw was found in dnsmasq. When following a CNAME in a DNS response, the resolver can cache records for the CNAME target without checking that those records belong to the responding server's authorized zone. In split-DNS deployments that send some domains to a specific upstream, an attacker who controls that upstream can inject cache entries for unrelated names. Later clients may then receive attacker-chosen addresses for those names.
-
CVE-2026-93007
•
published on October 29, 2026
A flaw was found in dnsmasq. The TCP DNS service uses a small fixed pool of child processes and does not set a receive timeout on client connections. A remote attacker can open idle TCP connections to port 53 and occupy the entire pool, preventing new TCP DNS connections and DNSSEC validation that requires TCP fallback. UDP DNS resolution continues, and occupied slots are released after a fixed lifetime.
-
CVE-2026-93005
•
published on November 8, 2026
IBM Process Mining 2.0.0 through 2.2.1 could allow an authenticated attacker to cause a denial of service through insufficient rate limiting of email notifications, resulting in excessive emails being sent to targeted recipients.
-
CVE-2026-93003
•
published on October 20, 2026
The Web add-on's HTTP server searches the entire request packet for header fields instead of stopping at the end of the header section. A header field name placed in the request body is therefore reported to the server as though it were a header, which lets a client control request framing decisions it should not be able to reach.
-
CVE-2026-92990
•
published on October 9, 2026
The SendPress Newsletters WordPress plugin through 1.26.1.20 protects a logging endpoint with a hardcoded token that is the same on every site rather than a per-site secret, allowing unauthenticated users to read newsletter sending logs, including recipient email addresses.
-
CVE-2026-92989
•
published on October 9, 2026
The SendPress Newsletters WordPress plugin through 1.26.1.20 does not check the user's capability on several newsletter-management actions, allowing any authenticated subscriber-level user to synchronise all site users into a mailing list and to drive the newsletter send queue.
-
CVE-2026-92980
•
published on September 17, 2026
HortusFox-Web prior to version 6.1 contains a remote code execution vulnerability that allows authenticated administrators to execute arbitrary OS commands as the web server user by abusing the Import/Export functionality. Attackers can leverage the Import/Export feature, which is intended solely for data portability, to deploy and execute malicious code on the underlying application server host.
-
CVE-2026-92977
•
published on October 3, 2026
The Real Cookie Banner: GDPR & ePrivacy Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment in all versions up to, and including, 5.3.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Malicious script payloads placed in the title attribute of an anchor tag survive WordPress's comment kses filter at save time, as the payload is only promoted to executable HTML attributes when the plugin's page-wide regex strips the closing quote delimiter at render time; exploitability is therefore subject to the standard comment moderation workflow before the comment is publicly displayed.
-
CVE-2026-92976
•
published on September 18, 2026
A stored Cross-Site Scripting (XSS) vulnerability in the profile management functionality of T-Systems’ TAO 2.0 suite. An authenticated user could inject malicious HTML or JavaScript content into the fields containing their personal data. The content entered is stored and displayed without being properly sanitised when another user, including administrative staff, views the affected profile. Successful exploitation could allow JavaScript code to be executed in the victim’s browser, access to information available within the session, or the performance of actions using the victim’s permissions.
-
CVE-2026-92970
•
published on September 17, 2026
HUBzero CMS through 2.2.32 contains a path traversal vulnerability in project file upload handlers that allows authenticated project members to write arbitrary files outside the project repository. Attackers can supply traversal sequences in upload parameters to write files to attacker-chosen paths with web server privileges, potentially enabling code execution.