-
CVE-2026-9708
•
published on July 13, 2026
Mattermost versions 11.7.x = 11.7.2, 11.6.x <= 11.6.4, 10.11.x <= 10.11.19 fail to validate that an assigned incoming webhook user has access to the target team or channel, which allows a requester with webhook management permissions to create posts or direct messages attributed to another user via crafted incoming webhook configuration and payloads.. Mattermost Advisory ID: MMSA-2026-00683
-
CVE-2026-9705
•
published on June 25, 2026
A flaw was found in Keycloak's client registration service. A remote attacker, possessing a previously issued Registration Access Token (RAT), could exploit this vulnerability to re-enable a client that an administrator had explicitly disabled. This bypasses security controls, allowing the attacker to reset the client's secret and potentially regain privileged API access. The primary impact includes unauthorized information disclosure and potential integrity compromise.
-
CVE-2026-9704
•
published on May 27, 2026
A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation.
-
CVE-2026-9703
•
published on October 15, 2026
Grafana's data source proxy did not apply role-based access control to write requests forwarded to Loki data sources. A user holding only the Viewer role on an affected Grafana instance could send POST, PUT and DELETE requests through the proxy to the Loki rules API (/loki/api/v1/rules), allowing them to create, modify and delete Loki alerting rules. Because those rules are stored by Loki rather than by Grafana, the change took effect for every user of that Loki data source, not only for the Viewer who made the request.
Exploitation requires an authenticated Viewer account on the Grafana instance and a configured Loki data source; no other privileges are needed. Both Grafana OSS and Grafana Enterprise are affected. The defect is in Grafana's data source proxy; Loki itself is not vulnerable and does not need to be patched.
-
CVE-2026-9702
•
published on June 25, 2026
The InPost PL WordPress plugin before 1.9.1 does not verify that the request originates from the legitimate buyer before allowing the WooCommerce order parcel-locker destination to be updated, allowing unauthenticated attackers to silently redirect the shipping destination of any pending or processing order on the site.
-
CVE-2026-9701
•
published on July 8, 2026
The Eventer plugin for WordPress is vulnerable to an insecure password reset mechanism in all versions up to, and including, 4.4.2. The plugin stores a plaintext copy of the password reset key in the `eventer_verification_code` user meta field when a user requests a password reset. The plaintext key stored in `wp_usermeta` can be used with the plugin's custom reset action to set a new password for any user. Combined with another vulnerability such as SQL Injection (CVE-2026-9700), this makes it possible for unauthenticated attackers to extract the plaintext reset key and take over any user account, including administrators. Note: The password reset function only works up to PHP version 7.4.
-
CVE-2026-9700
•
published on July 8, 2026
The Eventer plugin for WordPress is vulnerable to time-based SQL Injection via the ‘code’ parameter in all versions up to, and including, 4.4.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
-
CVE-2026-9699
•
published on June 26, 2026
Mattermost Plugins versions =11.6 10.18.11 11.3.6 11.6.5.0 fail to sanitize error responses from the OpenAI API before logging, which allows a user with access to server logs or support packets to obtain a valid or partially reconstructable OpenAI API key via inspection of mattermost.log entries generated during authentication failures. Mattermost Advisory ID: MMSA-2026-00609
-
CVE-2026-9698
•
published on June 9, 2026
DBI versions before 1.648 for Perl saved errors in a limited-sized buffer.
Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit.
Attackers that can influence the error text in an application can trigger a buffer overflow.
-
CVE-2026-9697
•
published on June 17, 2026
Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.
Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.
Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly.
-
CVE-2026-9696
•
published on October 10, 2026
The Download Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'not_found' parameter in all versions up to, and including, 3.3.58 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
-
CVE-2026-9695
•
published on July 8, 2026
An Improper Authentication vulnerability affecting DELMIA Apriso from Release 2020 through Release 2026 could allow an attacker to gain privileged access to the server.
-
CVE-2026-9694
•
published on June 11, 2026
GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.9 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions, could have allowed an unauthenticated user to impersonate the GitLab Support Bot and inject arbitrary content via a specially crafted Service Desk email reply due to improper neutralization in email template processing.
-
CVE-2026-9693
•
published on August 17, 2026
Mattermost versions 10.11.x = 10.11.20, 11.7.x <= 11.7.5 Mattermost fails to remove thread membership records when a user is removed from or leaves a team, which allows a previously removed user who is later re-invited to the team to view private channel thread root post content and metadata via the team threads API.. Mattermost Advisory ID: MMSA-2026-00682
-
CVE-2026-9692
•
published on June 18, 2026
Mojolicious::Sessions::Storable versions through 0.05 for Perl generate session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with the built-in rand function, the epoch time, the heap address of an anonymous hash, and the PID.
These are predictable or low-entropy sources that are unsuitable for security purposes.
-
CVE-2026-9691
•
published on June 15, 2026
Unauthenticated PHP Object Injection in Integration for ActiveCampaign and Contact Form 7, WPForms, Elementor, Ninja Forms = 1.1.1 versions.
-
CVE-2026-9690
•
published on June 17, 2026
Unauthenticated Arbitrary File Download in WP Media folder Addon = 4.0.1 versions.
-
CVE-2026-9689
•
published on May 27, 2026
A flaw was found in Keycloak, an open-source identity and access management solution. When a client application is configured to accept broad redirect Uniform Resource Identifiers (URIs), a remote attacker can manipulate the authentication process by crafting a special web address. If a user clicks this link, the client application might incorrectly prioritize attacker-controlled information over legitimate data. This vulnerability, known as HTTP parameter pollution, could allow an attacker to bypass security measures or gain unauthorized access to resources.
-
CVE-2026-9680
•
published on July 28, 2026
Improper exposure of the MCP server in alibabacloud-rds-openapi-mcp-server allows remote attackers to invoke exposed MCP tools via network access to an MCP endpoint listening on all network interfaces by default.
-
CVE-2026-9679
•
published on June 17, 2026
Impact:
undici's cookie parser in parseSetCookie percent-decodes cookie values via qsUnescape, turning encoded sequences like %0D%0A, %00, %3B, and %3D into their literal byte equivalents. RFC 6265 §5.4 does not specify any decoding and browsers do not decode either.
Applications that parse a Set-Cookie header and then forward the parsed value into a response header (proxies, middleware, SSR frameworks) become vulnerable to HTTP response header injection: an attacker-controlled upstream can inject arbitrary Set-Cookie, Location, or Cache-Control headers into the application's downstream response, enabling session fixation, open redirect, or cache poisoning.
Affected applications are those that use undici's cookie parsing (parseSetCookie, parseCookie, getSetCookies) and forward the parsed cookie value into a response header.
This was introduced in undici 7.0.0 via PR #3789.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, do not forward values returned by parseSetCookie/parseCookie/getSetCookies directly into response headers; sanitize the value first to strip or reject CR, LF, NUL, ;, and = bytes.