Full List

Search

Recent Vulnerabilities

• CVE-2026-98666 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16136: fix unprotected debugfs reads The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead.
• CVE-2026-98665 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: health: max30102: fix NULL dereference in interrupt handler The interrupt is requested in max30102_probe() and stays enabled for the lifetime of the device, but indio_dev-active_scan_mask is only valid while a buffer is enabled. When an interrupt arrives while no buffer is enabled, the handler dereferences the NULL active_scan_mask: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __bitmap_weight+0x64/0x98 (P) max30102_interrupt_handler+0x48/0x160 [max30102] Call max30102_fifo_count() at the top of the handler and return early unless it reports a FIFO sample is ready. Because FIFO_RDY is the only interrupt source enabled in max30102_chip_init(), an invocation of max30102_interrupt_handler() without the FIFO_RDY interrupt status bit set carries no data to read and can return before touching active_scan_mask. A negative return from max30102_fifo_count() indicates a failed interrupt status read and is treated the same way.
• CVE-2026-98664 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16400: fix unprotected debugfs reads adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too.
• CVE-2026-98663 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16480: fix unprotected debugfs reads The firmware_revision and firmware_date file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead.
• CVE-2026-98662 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data-work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review.
• CVE-2026-98661 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails.
• CVE-2026-98660 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup The sampling frequency tables store each frequency as an integer part and a fractional part in micro units. num_sampling_freq_avail is initialized to the number of flattened integer elements because read_avail() returns the table as a flat array. bmp280_write_sampling_frequency(), however, indexes the same table as a two-dimensional array and uses num_sampling_freq_avail as the number of rows. Convert the flattened element count back to the number of rows before iterating over the table.
• CVE-2026-98659 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: pressure: rohm-bm1390: Return error when read fails The data reading function ignores the cached error value, and unconditionally returns 0. Return cached 'ret' -value after stopping the measurement so user knows if read failed and data is garbage.
• CVE-2026-98658 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: proximity: aw96103: validate firmware data length The firmware parser reads a length from the binary header and then uses it to walk six-byte register/value entries. A truncated firmware image can make the parser read beyond the copied firmware buffer. A value smaller than the four-byte count field also underflows, producing a very large length. Read the little-endian field with get_unaligned_le32(), as previously proposed by David Lechner. Validate the header size, reject an underflowed length, ensure the resulting payload is contained in the firmware image, and require it to contain whole register/value entries.
• CVE-2026-98657 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mirroring the teardown order already used in lidar_remove().
• CVE-2026-98656 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers -reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool.
• CVE-2026-98655 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: perf: Require kernel access for text poke events Perf events with exclude_kernel=1 can be opened without kernel perf access. However, exclude_kernel does not suppress text-poke sideband records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL and contains a raw kernel instruction address. An unprivileged task can therefore open and mmap a task-local software event with text_poke=1. Both opening a count-only tracepoint event and configuring UDP GRO for ESP-in-UDP cause updates to inline static calls; the observer receives the relocated addresses of the modified instructions. For a known kernel image, any such address reveals the runtime kernel text base despite KASLR. Call perf_allow_kernel() whenever attr.text_poke is set, regardless of exclude_kernel. Events that neither monitor kernel execution nor request text-poke records retain their existing permissions.
• CVE-2026-98653 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix _gaccess_shadow_fault() In some circumstances, it is possible that the page of nested guest memory that is being shadowed is not present at all in the parent guest gmap. dat_entry_walk() will not find any leaf entry and return with -ENOENT, which will erroneously be propagated all the way to userspace. Fix by manually calling gmap_link() on the memory of the nested guest that is being shadowed if the mapping was not already present.
• CVE-2026-98652 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm-srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state().
• CVE-2026-98651 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes.
• CVE-2026-98650 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix potential races in dat skey functions When dat_cond_set_storage_key() finds a large page, it will conditionally set the storage key in absolute memory using large_crste_to_phys() to get the absolute address. There is a race window between dat_entry_walk() and large_crste_to_phys(): the large page could have been split concurrently, and large_crste_to_phys() might be called with a crste that does not designate a large page, leading to crashes. Similar issues were also present in dat_set_storage_key(). dat_get_storage_key() and dat_reset_reference_bit() did instead check for a potential concurrent splitting of the large page, but then handled it incorrectly. Fix by performing a READ_ONCE on the crste pointer, checking and using the result, instead of dereferencing the pointer again. In case a race is detacted, try dat_entry_walk() again.
• CVE-2026-98649 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times.
• CVE-2026-98648 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: s390/uv: Prevent potential out-of-bounds read When the system has more than 85 secrets, the uv_secret_list struct array only holds up to 85 items per page, resulting in an out of bounds read in find_secret_in_page if the targeted secret is in the next page or not stored at all. Fix this by looping over the number of stored secrets which is the per sub-list count of stored secrets and not the overall count.
• CVE-2026-98647 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t-size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems;
• CVE-2026-98646 • published on October 18, 2026 In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p-lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there.