-
CVE-2026-95664
•
published on October 26, 2026
Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume.
-
CVE-2026-95663
•
published on October 26, 2026
Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it.
-
CVE-2026-95662
•
published on October 2, 2026
Cross-Site Scripting vulnerability in the Repasat application. Successful exploitation of this vulnerability could allow an attacker to trick a user into executing arbitrary code in the victim’s browser. The “nomCompetidor” parameter is affected – endpoint “/es/competitors/store”.
-
CVE-2026-95661
•
published on September 22, 2026
MISP contains a reflected cross-site scripting (XSS) vulnerability in the attribute histogram view. The $selectedTypes variable, which is derived from the URL path segment , was interpolated directly into a JavaScript array literal inside an onClick HTML attribute without any encoding or escaping. An attacker who can cause an authenticated MISP user to visit a crafted URL containing a malicious type value can execute arbitrary JavaScript in the victim's browser within the MISP application origin.
Successful exploitation allows the attacker to read session cookies, perform actions on behalf of the victim, or exfiltrate sensitive data accessible from the MISP interface.
The vulnerability requires the victim to be authenticated and to actively navigate to the attacker-supplied URL.
-
CVE-2026-95660
•
published on September 22, 2026
A security flaw has been discovered in Moonshot AI Kimi Code up to 0.31.0. The affected element is an unknown function of the file agent-core-v2/src/agent/mcp/config-loader.ts of the component MCP Configuration Loader. The manipulation results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 0.31.1 is sufficient to fix this issue. It is recommended to upgrade the affected component. Beyond the trust prompt, the fix resolves fd/stty binaries to absolute paths specifically "so untrusted workspaces cannot plant bare-name executables before confirmation," fixing a secondary $PATH path-planting vector alongside the primary untrusted-.mcp.json auto-spawn.
-
CVE-2026-95659
•
published on September 22, 2026
MISP contains a reflected cross-site scripting (XSS) vulnerability in the AnalystDataController::viewForObject action. The method accepted a parent object type parameter from the URL without validation and passed it to the Overmind-themed AnalystData thread view element, where it was interpolated into two translated strings and rendered into the HTML response without output encoding. An authenticated attacker who can induce a victim to navigate to a crafted URL can inject arbitrary JavaScript that executes in the victim's browser within the MISP application context. This may allow the attacker to read session data, manipulate the page, or perform actions on behalf of the victim.
The vulnerability requires the victim to be authenticated to MISP and to actively visit the attacker-supplied URL. The affected component is the AnalystData controller and the Overmind theme's AnalystData thread element.
Version affected: 2.5.47
-
CVE-2026-95658
•
published on September 22, 2026
MISP's WorkflowsController exposed the moduleStatelessExecution action in the Security component's unlockedActions list. In CakePHP, listing an action in unlockedActions disables both the CSRF token check and the field hash validation for that action. Because moduleStatelessExecution executes a workflow module's exec() method with caller-supplied input and parameters, the absence of CSRF protection allowed an attacker to craft a cross-site form post (or equivalent cross-origin request) that, when submitted by an authenticated site administrator, would cause the administrator's browser to invoke the action on the MISP instance.
The attacker could select any workflow module to execute, including action modules that write blocklist and warninglist entries, and supply arbitrary input and parameters of their choosing. This constitutes a cross-site request forgery (CSRF) vulnerability with high integrity impact on the MISP instance's security-related data.
The vulnerability was identified during an internal security review and was not externally reported. The fix is included in MISP v2.5.47.
-
CVE-2026-95657
•
published on September 22, 2026
A vulnerability was determined in dgtlmoon Changedetection.io up to 0.55.8. This issue affects the function setCurrentSelectedText of the file changedetectionio/static/js/visual-selector.js of the component Visual Selector. Executing a manipulation of the argument s can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.60.1 is capable of addressing this issue. This patch is called aac6fcfa594f17511b8ff73e5eaa4f6c33899de0. It is suggested to upgrade the affected component.
-
CVE-2026-95656
•
published on September 22, 2026
A vulnerability was found in dgtlmoon changedetection.io up to 50389b07. This vulnerability affects the function add_watch_ui_snapshot of the file changedetectionio/blueprint/add_watch_ui/__init__.py of the component Preview Endpoint. Performing a manipulation of the argument url results in server-side request forgery. The attack can be initiated remotely. The exploit has been made public and could be used. Upgrading to version 0.60.1 is able to resolve this issue. The patch is named 71d332d5a0d3da2a0fe89a392413bf4b7d27c84e. The affected component should be upgraded. Was fixed upstream.
-
CVE-2026-95655
•
published on September 22, 2026
Aureus ERP before 1.5.0 fails to scope message lookups to the current record in ChatterPanel, allowing authenticated users to access arbitrary messages. Attackers can submit sequential message IDs to read, edit, delete, or pin messages from other departments or companies, and enumerate all notes in the system.
-
CVE-2026-95654
•
published on September 22, 2026
Databasement before 1.7.14 validates invitation tokens only when the acceptance page loads, caching the authorization decision without re-checking token validity during acceptance. Attackers with a leaked or forwarded invitation link can load the page while pending, then accept the invitation after the legitimate user has already accepted it to overwrite the account password and gain authenticated access to managed database credentials and secrets.
-
CVE-2026-95653
•
published on September 22, 2026
Concrete CMS Community Store before 2.7.8 derives digital product download tokens from order creation timestamps instead of random values, making tokens predictable. Unauthenticated attackers can enumerate sequential order and file identifiers to calculate valid download tokens and retrieve digital goods purchased by other customers.
-
CVE-2026-95652
•
published on November 5, 2026
Execution with unnecessary privileges vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute pardus-usb-formatter allows Privilege Abuse.
This issue affects pardus-usb-formatter: from 0.7.0 before 0.7.2.
-
CVE-2026-95651
•
published on November 10, 2026
Zoho Corporation ManageEngine DDI Central versions 6500 and below are vulnerable to an unauthenticated GSS-TSIG keytab update vulnerability in the Linux Node Agent.
-
CVE-2026-95649
•
published on November 4, 2026
IRISPowerscan insufficiently restrict the use of
untrusted scripts. An authenticated user with access to script functionality
can import or modify scripts that are executed by the application, potentially
resulting in arbitrary code execution in the security context of the Windows
user running IRISPowerscan.
-
CVE-2026-95648
•
published on November 9, 2026
Improperly controlled modification of Dynamically-Determined object attributes vulnerability in C-Prot Inc. C-Prot AppDefense allows Privilege Escalation.
This issue affects C-Prot AppDefense: before 1.0.2729.
-
CVE-2026-95646
•
published on November 10, 2026
Zoho Corporation ManageEngine DDI Central versions 6500 and below are vulnerable to a Unicode-based command injection vulnerability in the Cisco IOS DHCP configuration functionality. This vulnerability could allow cluster-scoped operators to inject specially crafted Unicode characters, resulting in the execution of unintended device commands.
-
CVE-2026-95641
•
published on October 13, 2026
Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
-
CVE-2026-95640
•
published on October 13, 2026
Photoshop Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
-
CVE-2026-95639
•
published on October 13, 2026
Photoshop Desktop is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed.