-
CVE-2026-94457
•
published on September 23, 2026
Unauthenticated Bypass Vulnerability in Captcha Code = 3.32 versions.
-
CVE-2026-94456
•
published on September 22, 2026
Postiz generates security-sensitive credentials using `Math.random()` instead of a cryptographically secure source. The same helper is used for OAuth access tokens, authorization codes, client secrets, organization API keys, and PKCE verifiers, meaning these credentials depend entirely on V8’s deterministic xorshift128+ PRNG state.
An unauthenticated OAuth dynamic client registration endpoint exposes freshly generated client credentials, giving attackers enough consecutive PRNG output to reconstruct that internal state. Once recovered, they can deterministically derive past and future values produced by the same generator, potentially compromising credentials belonging to other users and organizations.
-
CVE-2026-94455
•
published on September 22, 2026
An HTTP endpoint intended for provisioning enterprise and reseller organisations is reachable without any session. The authentication middleware is bound only to an explicit list of controllers, and the enterprise controller is not on that list, so no authentication runs for these routes.
The endpoint's only check is that the request body carries a token bearing a valid signature from the instance secret. It does not check what that token was issued for. Login tokens are signed with the same secret and carry no purpose, audience or expiry claim, so an ordinary user's own session token satisfies the check.
Presented with such a token, the endpoint creates a new organisation holding the highest subscription tier, flagged as lifetime and with a channel allowance far above any sold plan, creates an organisation-owner account alongside it, and returns the new organisation's API key in the response body. That key is immediately valid against the public API.
-
CVE-2026-94453
•
published on October 13, 2026
Libreswan's pluto daemon has a use-after-free vulnerability when a client connecting using IKE over TCP closes the connection and another packet (retransmit or malicious) is received for the same tuple. IKE state is retained in memory after the client closes the connection, storing a pointer to iface_endpoint inside ike_sa.sa-st_iface_endpoint. Once this invalid pointer is used, the daemon crashes and restarts. This vulnerability can be triggered before the remote peer has authenticated itself. Continued exploitation can lead to a denial of service. Remote code execution could be possible. The IKE over TCP option is not enabled by default; only configurations that contain listen-tcp=yes are affected.
-
CVE-2026-94451
•
published on October 12, 2026
Quarkus REST Data Panache provides a way to automatically generate REST endpoints for data entities. A flaw was found where certain endpoints do not properly check the sort parameter provided by users. This could allow an attacker to learn information they should not have access to or slow down the system by forcing the database to perform complex tasks, potentially causing a denial of service.
-
CVE-2026-94450
•
published on September 22, 2026
Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected.
To remediate this issue, users should upgrade to version v1.89.0 or later.
-
CVE-2026-94449
•
published on September 21, 2026
A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory.
-
CVE-2026-94448
•
published on October 8, 2026
When a JavaScript template literal contains consecutive expressions, the context tracking state was not properly reset upon entering a new expression. We now ensure that template-literal expression entries correctly reset context variables so all subsequent regular expression literals are accurately recognized and escaped.
-
CVE-2026-94447
•
published on October 8, 2026
Previously, a user operating inside of a malicious Go project that defines a bogus golang.org/toolchain go.sum entry and operates a malicious GOMODPROXY the user chooses to use can bypass the intended checksum. We now ensure that golang.org/toolchain always goes to the network for the canonical checksum.
-
CVE-2026-94445
•
published on September 25, 2026
A malicious txtar could escape the intended execution context and force arbitrary writes to the playground host's trusted filesystem.
Disjointly, one of the three possible paths to invoke go vet on the playground host did not correctly restrict the execution environment. This permitted a Go process to make a read for an environment configuration file rooted in the playground host's $HOME.
Together, a well-crafted go env file and the go vet invocation could lead to remote code execution in the playground host itself.
This does not affect users of go.dev/play directly; however, it may affect independent deployments of golang.org/x/playground.
-
CVE-2026-94444
•
published on October 8, 2026
Previously, a user operating inside of a malicious Go project that defines a bogus golang.org/fips140 and operates a malicious GOMODPROXY the user chooses to connect to can serve an arbitrary module in its place. We now unpack the trusted ziphash for the bundled golang.org/fips140 module and construct its entry in the GOMODCACHE such that it can be verified by the toolchain.
-
CVE-2026-94440
•
published on October 8, 2026
Parsing a multipart form can bypass memory limits and read an arbitrarily long line into memory when the remaining limit at the start of a part is less than 400 bytes.
-
CVE-2026-94439
•
published on October 8, 2026
When an HTTP server handler sends a 2xx response to an HTTP/1 CONNECT request and returns without hijacking the connection, the server improperly continues to read and serve requests from the connection. Since a 2xx response to an HTTP/1 CONNECT converts the connection into a tunnel, the server should not treat the connection as continuing to contain HTTP. The impact of this misbehavior is mostly limited to potential request smuggling, where an intermediate proxy considers the data on the connection to be tunneled and the server considers it to be HTTP.
-
CVE-2026-94434
•
published on November 9, 2026
Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus Boot Repair allows OS Command Injection.
This issue affects Pardus Boot Repair: from 1.0.8 before 1.0.9.
-
CVE-2026-94432
•
published on October 2, 2026
The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.7.1 via the OsPaypalConnectController::create_order_for_transaction() action registered as a public (unauthenticated) route through wp_ajax_nopriv_latepoint_route_call. The handler loads an OsInvoiceModel by a sequential integer 'invoice_id' with no access-key/UUID or ownership check (the sibling Stripe and Razorpay handlers require a 128-bit access-key UUID via OsInvoicesHelper::get_invoice_by_key), and then calls OsTransactionIntentHelper::create_or_update_transaction_intent() which persists a transaction intent tied to the target invoice's customer_id, order_id and charge_amount and regenerates its intent_key before the PayPal-configured guard is reached. This makes it possible for unauthenticated attackers to enumerate invoices belonging to arbitrary customers, create unauthorized transaction-intent rows linked to another customer's data, and overwrite the intent_key of any in-flight NEW-status transaction intent — invalidating the intent_key that legitimate Stripe/Razorpay flows are waiting on and breaking payment webhooks for those customers.
-
CVE-2026-94426
•
published on September 21, 2026
A vulnerability was determined in xuxueli xxl-job up to 3.5.0. The impacted element is an unknown function of the file /jobgroup/insert. This manipulation of the argument Name causes cross site scripting. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-94425
•
published on September 21, 2026
A vulnerability was found in Moore Threads MTT S80 Driver Package 340.150. The affected element is the function sub_140006F0C in the library mtdispkm64.sys of the component IOCTL Handler. The manipulation results in improper privilege management. Attacking locally is a requirement. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-94424
•
published on September 21, 2026
A vulnerability has been found in Moore Threads MTT S80 Driver Package up to 340.150. Impacted is the function sub_140001000 in the library mtdispkm64.sys of the component IOCTL Handler. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-94423
•
published on October 21, 2026
Net::LibSSH versions before 0.004 for Perl authenticate to an unverified server because connect never checks the host key against known_hosts.
connect reports success as soon as ssh_connect returns SSH_OK. libssh leaves the known-hosts check to the application, and this binding never makes it, so the strict_hostkeycheck and knownhosts options are set on the session and then decide nothing.
Password, agent and public-key authentication, channel and SFTP operations all run on a session whose peer was never identified, so an attacker who can redirect the connection receives the password when password authentication is used, and commands and data sent over the session.
-
CVE-2026-94422
•
published on October 2, 2026
An incorrect implementation of message filtering in xdg-dbus-proxy versions before 0.1.9 allows an attacker to bypass the intended message filtering on the D-Bus session bus by setting a reply serial number on non-reply messages. A malicious or compromised Flatpak app could use this to achieve arbitrary code execution outside its sandbox. xdg-dbus-proxy was designed to be part of the sandbox boundary for Flatpak, but it is released as a separate project and is sometimes used by other app frameworks such as Firejail.