Full List

Search

Recent Vulnerabilities

• CVE-2026-74514 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current-mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequently free these resources when the pages are unpinned. [borntraeger@linux.ibm.com: Fixed whitespace]
• CVE-2026-74512 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e-rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed.
• CVE-2026-74510 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev-mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command.
• CVE-2026-74508 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb-data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it.
• CVE-2026-74506 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: afs: Fix UAF when sending a message In afs_make_call(), there's a race with async call reception and destruction. If a call is dispatched that doesn't have call-write_iter set (used to specify the data content for FS.StoreData), then the first rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr. Once rxrpc_send_data() queues the last request packet, the response could come in at any time and cause the call to be completed and put. However, afs_make_call() will look at the call again to see it ->write_iter should be handled - something it's only allowed to do if it has its own ref on the call. Whilst this is the case for synchronous calls, it isn't true for async calls such as FS.FetchData. There's also a potential UAF in afs_make_call() in the event that an asynchronous call is being sent, but the call fails in some way (e.g. it gets aborted from the server). The problem there is that afs_make_call() tries to abort a call if the rxrpc send fails, but the asynchronous notification from rxrpc may have caused the afs_call to be torn down. generic/650 plays games with randomly taking CPUs offline, and can interject a significant delay such that the call is deallocated before afs_make_call() gets to check call->write_iter - and a UAF ensues (caught by KASAN). BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs] Read of size 8 at addr ffff888035e050e8 by task fsstress/1409 Fix this by making afs_make_op_call() give the op->call its own ref rather than transferring the caller's ref to it and then dropping the ref when afs_make_call() returns. This also means that the afs_make_call() func never loses its ref on the call now.
• CVE-2026-74495 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: igbvf: Fix leak in TX DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented before each frag mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping (the head) would leak. This bug was introduced by a 2010 fix for an endless loop in dma_error. All other affected drivers have already been fixed.
• CVE-2026-74492 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: do not update comments from kernel-side hash adds mtype_resize() copies comment pointers with memcpy(), not the comment objects themselves. During the window after an entry has been copied but before the table swap and backlog replay, the old table is still published for packet-side updates while the replacement-table entry already holds the same ip_set_comment_rcu pointer. If xt_SET --add-set ... --exist hits that old entry in this window, mtype_add() calls ip_set_init_comment() even though packet-side adds carry no comment payload. That call frees the shared comment through the old entry, so the replacement-table entry now holds a stale pointer. When the queued add is replayed on the new table, mtype_add() calls ip_set_init_comment() again and strlen() dereferences the stale pointer. Fix this in mtype_add() by skipping ip_set_init_comment() when ext-target marks a packet-side add. Userspace adds still update comments, while packet-side adds can no longer free comment storage shared with a resize copy.
• CVE-2026-74483 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb-s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down.
• CVE-2026-74480 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp-ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry.
• CVE-2026-74472 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub-dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state.
• CVE-2026-74470 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) > ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000.
• CVE-2026-74468 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip-spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path").
• CVE-2026-74466 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used.
• CVE-2026-74461 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx-slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer.
• CVE-2026-74456 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() - urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation").
• CVE-2026-74454 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO.
• CVE-2026-74453 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool.
• CVE-2026-74442 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw-crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory.
• CVE-2026-74437 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work If a UVC camera has an asynchronous control, uvc_status_stop may be called from async_ctrl.work: uvc_ctrl_status_event_work() uvc_ctrl_status_event() uvc_ctrl_clear_handle() uvc_pm_put() uvc_status_put() uvc_status_stop() cancel_work_sync() This will cause a deadlock, since cancel_work_sync will wait for uvc_ctrl_status_event_work to complete before returning. Fix this by returning early from uvc_status_stop if we are currently in the work function. flush_status now remains false until uvc_status_start is called again, ensuring that uvc_ctrl_status_event_work won't resubmit the URB.
• CVE-2026-74436 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx-backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog.