Full List

Search

Recent Vulnerabilities

• CVE-2026-72486 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan-cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_ipc3_validate_fw_version sof_ipc3_do_rx_work sof_ipc3_rx_msg mt8196_dsp_handle_request mtk_adsp_ipc_recv mbox_chan_received_data mtk_adsp_mbox_isr irq_thread_fn Freed by task ...: kfree devres_release_all really_probe ... (sof-audio-of-mt8196 probe failure) The crash was observed roughly three seconds after the failed probe. disable_irq() in shutdown and enable_irq() in startup. disable_irq() also waits for any in-flight interrupts, so by the time mbox_free_channel() proceeds to clear chan->cl no rx_callback can run. In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked between probe and the first client bind — otherwise an early interrupt can crash on chan->cl == NULL in mbox_chan_received_data().
• CVE-2026-72485 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to nr_outconns (or nr_inconns) entries and dereferences each pointer unconditionally, hitting the NULL or garbage entry and panicking instead of failing gracefully. Fix by moving the counter increments to after all allocations succeed, so the struct is always consistent on any error path.
• CVE-2026-72479 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller.
• CVE-2026-72464 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf-rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted.
• CVE-2026-72459 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: apparmor: aa_label_alloc use aa_label_free on alloc failure aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed.
• CVE-2026-72455 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: apparmor: fix uninitialised pointer passed to audit_log_untrustedstring() Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases") intrdouced a small bug, where path_name() may pass a potentially uninitialized *name to aa_audit_file() if the path-dentry had been replaced with aa_null.dentry earlier on. This can lead to page fault like one observed on 7.0.2 openSUSE Tumbleweed kernel: [51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003 [51692.242762] [ T24690] #PF: supervisor read access in kernel mode [51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page [51692.242765] [ T24690] PGD 0 P4D 0 [51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI [51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51 [51692.242775] [ T24690] Tainted: [O]=OOT_MODULE [51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026 [51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30 [51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48 [51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282 [51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000 [51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003 [51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000 [51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700 [51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80 [51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000 [51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0 [51692.242799] [ T24690] PKRU: 55555554 [51692.242800] [ T24690] Call Trace: [51692.242802] [ T24690] [51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40 [51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0 [51692.242816] [ T24690] aa_audit+0x5a/0x170 [51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0 [51692.242825] [ T24690] path_name+0xd2/0x100 [51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0 [51692.242832] [ T24690] aa_path_perm+0xef/0x150 [51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0 [51692.242840] [ T24690] security_file_open+0x46/0xd0 [51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0 [51692.242848] [ T24690] vfs_open+0x30/0x100 While here, initialise variables which are passed down to path_name().
• CVE-2026-72449 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm The cleanup tail of kfd_criu_resume_svm() walks svms-criu_svm_metadata_list and kfree()s each struct criu_svm_metadata without removing it from the list. The list head is left pointing at freed kmalloc-96 objects. A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty() reads the dangling ->next (use-after-free), the loop walks freed entries, and each is kfree()'d again (double-free). This is reachable by an unprivileged render-group user via /dev/kfd with no capabilities required. Add list_del() before the kfree() so the list is properly emptied. The list_for_each_entry_safe() iterator already caches the next pointer, so unlinking during the walk is safe. (cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1)
• CVE-2026-72446 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info-data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has.
• CVE-2026-72443 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint. This was observed as a KASAN slab-use-after-free in input_urb_complete(). The buggy scenario involves two paths, with each column showing the order within that path: probe error path: USB completion path: 1. start_input_streams() submits 1. The HCD still owns a input URBs. submitted input URB. 2. A later setup helper returns 2. input_urb_complete() runs an error. with urb-context in ep. 3. snd_usb_midi_v2_free() frees 3. The completion reads ep endpoint storage and URB buffers. state and can requeue URBs. Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0 Workqueue: usb_hub_wq hub_event RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50 Read of size 8 Call trace: dump_stack_lvl+0x77/0xb0 print_report+0xce/0x5f0 input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __usb_hcd_giveback_urb+0x112/0x1d0 dummy_timer+0xaaa/0x19a0 lock_is_held_type+0x9a/0x110 __lock_acquire+0x467/0x28b0 mark_held_locks+0x40/0x70 _raw_spin_unlock_irqrestore+0x44/0x60 lockdep_hardirqs_on_prepare+0xbb/0x1a0 __hrtimer_run_queues+0x101/0x520 hrtimer_run_softirq+0xd0/0x130 handle_softirqs+0x15b/0x670 __irq_exit_rcu+0xd0/0x170 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20
• CVE-2026-72439 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending leak on write request failures raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails.
• CVE-2026-72436 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a new/temporary set creation phase
• CVE-2026-72432 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: tpm_crb: Check ACPI_COMPANION() against NULL during probe Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the tpm_crb driver.
• CVE-2026-72426 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer spill metadata during half-slot cleanup __clean_func_state() cleans dead stack slots in 4-byte halves. When the high half of a STACK_SPILL slot is dead and the low half remains live, cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears the saved spilled_ptr metadata. That conversion is safe only for scalar spills. For a pointer spill, this metadata clear lets a later 32-bit fill from the still-live half avoid the normal non-scalar register-fill check and be treated as an ordinary scalar stack read. Leave non-scalar spill slots intact in this half-live shape. This is conservative for pruning and preserves the existing check_stack_read_fixed_off() rejection path for partial fills from pointer spills.
• CVE-2026-72412 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes.
• CVE-2026-72404 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub-rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency.
• CVE-2026-72402 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: bpf: Mask pseudo pointer values in verifier logs print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address.
• CVE-2026-72398 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk-chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer.
• CVE-2026-72397 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads.
• CVE-2026-72394 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero Sashiko reports: In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function calculates the fan RPM using the tachometer value. However, it does not check if the tachometer value is zero before performing the division. If the hardware reports a tachometer value of 0 (which can happen due to an extremely fast pulse, a stuck edge, or a hardware glitch), the calculated tach_div evaluates to 0. The subsequent call to do_div() with tach_div as the divisor triggers a divide-by-zero exception, leading to a kernel panic. Check the divisor against zero to fix the problem.
• CVE-2026-72718 • published on August 10, 2026 goose is general-purpose AI agent that runs on your machine. Prior to 1.44.0, the `goose review` command runs the system `git` executable to gather the diff for review without stripping attacker-controlled Git configuration. A malicious repository whose `.git/config` sets [`core] fsmonitor = command` causes Git to execute that command on the host during the index refresh performed by `git diff HEAD`. The command runs before goose contacts a model and without a submitted prompt, model call, tool approval, or trust prompt. The context-gathering Git process is not sandboxed and is outside goose's tool-permission model. Arbitrary commands run with the privileges and environment of the user running goose, allowing file access or modification and exfiltration of environment secrets and provider API keys. The vulnerable Git invocations are built by git_command() in crates/goose-cli/src/commands/review/handler.rs and are used by touched_files() and collect_diff() for `git diff --name-only HEAD` and `git diff HEAD`. This issue is fixed in version 1.44.0.