Full List

Search

Recent Vulnerabilities

• CVE-2026-72353 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni-runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior.
• CVE-2026-72350 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path.
• CVE-2026-72348 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers.
• CVE-2026-72347 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_connmark: reject invalid shift parameters Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path.
• CVE-2026-72346 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume The driver registers two distinct WMI devices: a control device (BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During the probe phase, the event device handling path returns early before initializing the platform profile device (data-pp_dev), leaving it NULL. However, the PM sleep operations are registered globally for the WMI driver and are triggered for both devices. When entering suspend, the event device invokes bitland_mifs_wmi_suspend(), which passes the uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads to a NULL pointer dereference inside dev_get_drvdata(), causing a kernel Oops and halting the suspend sequence. Fix this by adding a validity check for data->pp_dev in both the suspend and resume callbacks, safely skipping profile operations for the event device.
• CVE-2026-72339 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation.
• CVE-2026-72337 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary work item and schedules do_enable_set() on system_wq, then returns to debugfs. The debugfs active operation has ended at that point, but the worker still executes module text and manipulates enable_6lowpan and listen_chan. bt_6lowpan_exit() removes the debugfs files and immediately closes and puts listen_chan. It has no pointer to the queued work item, so it cannot cancel or flush it before tearing down the state that the worker uses. The buggy scenario involves two paths, with each column showing the order within that path: debugfs enable write module exit 1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes set_enable work the debugfs file 2. schedule_work() queues 2. bt_6lowpan_exit() closes do_enable_set() and puts listen_chan 3. the write operation returns 3. module teardown can continue 4. do_enable_set() later runs against stale state Run the enable state transition synchronously in lowpan_enable_set() instead. The simple debugfs setter can sleep, and this file already handles the 6LoWPAN control write synchronously under the same set_lock. Once the setter returns, debugfs removal covers the whole operation and exit can no longer race with an untracked work item. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0 Workqueue: events do_enable_set [bluetooth_6lowpan] The buggy address belongs to the object at ffff888109cb8000
• CVE-2026-72336 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon-l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30
• CVE-2026-72335 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev-adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30
• CVE-2026-72331 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix VMA access race aie2_populate_range() and amdxdna_umap_release() access a saved VMA pointer that may have already been freed, leading to a potential use-after-free. Remove the VMA accesses from these functions to avoid the race.
• CVE-2026-72321 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer() When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped in igmp_stop_timer(), the code currently decrements the reference counter of the multicast list entry @im using refcount_dec(&im-refcnt). However, both functions can be called from the RCU reader path: - igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu() - igmp_stop_timer() via igmp_rcv() -> igmp_heard_report() If the group im was concurrently removed from the list by ip_mc_dec_group(), its reference count might have already been decremented to 1. In this case, timer_delete() succeeds, and refcount_dec() decrements the refcount from 1 to 0. Since refcount_dec() does not free the object when it hits 0 (unlike ip_ma_put()), the im structure is leaked. Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt), and deferring the put until after the spinlock is released.
• CVE-2026-72319 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers.
• CVE-2026-72313 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Only consider active CRTCs for vblank sync Only synchronize fbdev output to the vblank of an active CRTC. Go over the list of CRTCs and pick the first that matches. Fixes warnings as the one shown below [ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867 [ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0 This currently happens if the fbdev output is not on CRTC 0. Atomic and non-atomic drivers require distinct code paths. As for other fbdev operations, implement both and select the correct one at runtime. Not finding an active CRTC is not a bug. Do not wait in this case, but flush the display update as before. v4: - avoid possible deadlocks with locking context (Sashiko) v3: - drop excessive state validation (Jani) - acquire plane and CRTC mutices (Sashiko) v2: - move look-up code into separate helper - support drivers with legacy modesetting v1: - see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/
• CVE-2026-72311 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: drm/xe: free madvise VMA array on L2 flush failure xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas(). After get_vmas() succeeds with at least one VMA, error paths must go through free_vmas so the array is released before the madvise details are destroyed. The L2 flush validation path added for PAT madvise rejects some SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on each failed ioctl. Jump to free_vmas instead, matching the other validation failure paths after get_vmas() has succeeded. (cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a)
• CVE-2026-72306 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg-complete is false list_del(msg); - double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section.
• CVE-2026-72305 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: VDUSE: avoid leaking information to userspace The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace.
• CVE-2026-72299 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk-sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context.
• CVE-2026-72295 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate irqchip index in irqfd routing Sashiko reported that the irqchip index is not validated for LoongArch. Add validation and reject out-of-range irqchip indexes to avoid indexing past the routing table's chip array.
• CVE-2026-72293 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: Add missing radix_tree_preload() in _gaccess_shadow_fault() Add missing radix_tree_preload() in _gaccess_shadow_fault() to guarantee forward progress. The core of _gaccess_shadow_fault() has been split into ___gaccess_shadow_fault() in order to simplify locking.
• CVE-2026-72291 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix unlikely race in try_get_locked_pte() Fix an unlikely race in try_get_locked_pte(), which could have happened if puds or pmds get unmapped between the p?dp_get() and p?d_offset() functions.