-
CVE-2026-72215
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf()
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
-
CVE-2026-72213
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch
In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd
and non-rsvd hugetlb cgroup charges. When map_chg is set,
hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but
the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg
with the non-rsvd cgroup pointer.
As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong
(non-rsvd) cgroup pointer into the folio's rsvd slot.
When the folio is later freed, free_huge_folio() unconditionally calls
both hugetlb_cgroup_uncharge_folio() and
hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the
wrong cgroup from the folio and decrements a counter that was never
charged for that cgroup, causing a page_counter underflow:
page_counter underflow: -512 nr_pages=512
WARNING: mm/page_counter.c:61 at page_counter_cancel
Fix this by introducing a separate h_cg_rsvd pointer exclusively for the
rsvd charge path, keeping the rsvd and non-rsvd charges fully independent
through their charge, commit, and error uncharge paths.
-
CVE-2026-72204
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: centalize $INDEX_ROOT header validation
Add a dedicated helper to perform stricter validation of $INDEX_ROOT and
use it for both directory inodes and named index inodes. This keeps the
root size and header geometry checks consistent across both read paths.
-
CVE-2026-72202
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol-free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state.
-
CVE-2026-72200
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run.
-
CVE-2026-72199
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident index root values on lookup
Resident $INDEX_ROOT values carry index header fields that callers
consume after lookup. Some callers already validate parts of the layout
before walking entries, but those checks are scattered and do not cover
all root header invariants, such as entries_offset alignment and lower
bound, index_length, and allocated_size consistency.
The resident root resize paths now keep these header fields consistent
while the value size changes: ntfs_ir_truncate() lowers
index.allocated_size before shrinking the resident value, and
ntfs_ir_reparent() grows the resident value before publishing a larger
root header. Lookup-time validation can therefore cover these invariants
without tripping over the driver's own resize paths.
Add $INDEX_ROOT to the minimum resident value size table and validate the
resident index header fields before returning the attribute from lookup.
Require 8-byte aligned index header fields, a sane entries_offset, an
index_length within allocated_size, allocated_size within the resident
value, and enough entry space for at least an index entry header.
The shared validator already rejects non-resident records for
resident-only attribute types, including $INDEX_ROOT.
-
CVE-2026-72197
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
In do_action()'s DeleteIndexEntryAllocation case, e-size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes]
-
CVE-2026-72193
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs3: cap RESTART_TABLE free-chain walker at rt-used
A crafted NTFS3 disk image triggers an in-kernel infinite loop at
mount time, hanging the mounting thread and firing the soft-lockup
watchdog within ~22s on multi-CPU hosts (panic with
kernel.softlockup_panic=1). The bug is reachable from desktop USB
auto-mount on distributions where udisks2 routes the NTFS signature
to the in-tree ntfs3 driver (Arch family and an increasing fraction
of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual
mount elsewhere.
check_rstbl()'s second walker iterates the free-entry singly-linked
list headed by rt->first_free with no upper bound on iteration count:
for (off = ff; off;) {
if (off == RESTART_ENTRY_ALLOCATED)
return false;
off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off));
if (off > ts - sizeof(__le32))
return false;
}
The existing guards cover three exits: end-of-list (off == 0), the
in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds
(off > ts - sizeof(__le32)). None of the three prevents an
in-bounds cycle.
A crafted on-disk RESTART_TABLE whose free chain contains a
self-loop or A->B->A cycle whose offsets satisfy:
- in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)]
- (off - sizeof(struct RESTART_TABLE)) % rsize == 0
passes all existing guards and spins the mount-time thread forever.
Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal
RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18
stores 0x18 as its next pointer; mount of the forged image with
the in-tree ntfs3 driver never returns.
Bound the walker by rt->used. Each entry on a legitimate free
chain is unique, and the total slot count is ne = le16_to_cpu
(rt->used). A traversal that visits more than ne slots is by
construction malformed; reject it as a corrupt RESTART_TABLE.
After this patch, mount of the forged image returns with -EINVAL
and a log_replay failure message, and mkntfs-produced legitimate
images mount cleanly (verified in the same UML harness).
-
CVE-2026-72173
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
Patch series "mm/hmm: A fix and a selftest", v3.
Patch 1 fixes a stale warning present from the time when only migration
softleaf entries were supported at the PMD level.
Patch 2 adds some code into hmm-tests.c which exercises the pagemap path
for PMD device-private entries.
This patch (of 2):
pagemap_pmd_range_thp() warns if a non-present PMD is not a migration
entry. This became false once device-private entries at the PMD level
were added.
Therefore, remove the stale migration-only assertion.
-
CVE-2026-72170
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close.
-
CVE-2026-72169
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES
When using scratch_scale, the scratch sizes are rounded up to
CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This
is not done when using fixed scratch sizes via command line. This can
result in user specifying a size which is not aligned, and thus kernel
releasing a pageblock that is only partially scratch.
Do the rounding up for both cases in scratch_size_update().
-
CVE-2026-72163
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
[BUG]
A direct write over unwritten extents can panic the kernel in
ocfs2_assure_trans_credits() when the journal aborts during DIO
completion. The crash is a general protection fault from a NULL pointer
dereference.
[CAUSE]
ocfs2_dio_end_io_write() loops over a direct write's unwritten extents,
marking each written under a single journal handle. If the journal
aborts (for example after an I/O error) while the extent tree is being
updated, the handle is left aborted with its transaction pointer
cleared. The extent merge treats that failure as not critical and
reports success, so the loop keeps using the handle.
ocfs2_assure_trans_credits() reads the handle's remaining credits
without first checking whether the handle is aborted, and that read
dereferences the cleared transaction pointer.
[FIX]
A journal abort is recorded in the handle itself, so callers are
expected to test the handle rather than rely on a returned error.
Make ocfs2_assure_trans_credits() do that, as the other ocfs2 journal
helpers already do, and return -EROFS when the handle is aborted.
-
CVE-2026-72155
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: swp: Improve locking user experience
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite option) and lock_len, which in practice should be
reduced down to 0, is set to "nor-params->size - (ofs + len)" which is
a positive number. This is wrong.
An easy way is to simply add an extra condition. In the unlock() path,
if we can achieve the same result from both sides, it means we unlock
everything and lock_len must simply be 0. A comment is added to clarify
that logic.
-
CVE-2026-72154
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
openrisc: Fix jump_label smp syncing
The original commit 8c30b0018f9d ("openrisc: Add jump label support")
copies from arm64 and does not properly consider how icache invalidation
on remote cores works in OpenRISC. On OpenRISC remote icaches need to
be invalidated otherwise static key's may remain state after updating.
Fix SMP cache syncing by:
1. Properly invalidate remote core icaches on SMP systems by using
icache_all_inv. The old code uses kick_all_cpus_sync() which runs a
no-op IPI function call on remote CPU's which does execute a lot of
code and flushes many cache lines in the process, but does not flush
all and it's not correct on OpenRISC.
2. For architectures that do not have WRITETHROUGH caches be sure
to flush the dcache after patching.
To test this I first reproduced the issue using a custom test module
[0]. The test confirmed that some icache lines maintained stale
static_key code sequences after calling static_branch_enable(). After
this patch there are no longer jump_label coherency issues.
[0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test
-
CVE-2026-72147
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma-pcie: Reject devices without driver data
dw_edma_pcie_probe() treats the PCI device ID driver_data as the
template for the controller layout and copies it unconditionally. A
device bound dynamically via sysfs can match the driver without that
data, which leads to a NULL pointer dereference.
Reject such matches before enabling the device.
-
CVE-2026-72146
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sh: rz-dmac: Move interrupt request after everything is set up
Once the interrupt is requested, the interrupt handler may run immediately.
Since the IRQ handler can access channel-ch_base, which is initialized
only after requesting the IRQ, this may lead to invalid memory access.
Likewise, the IRQ thread may access uninitialized data (the ld_free,
ld_queue, and ld_active lists), which may also lead to issues.
Request the interrupts only after everything is set up. To keep the error
path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent().
-
CVE-2026-72145
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines.
-
CVE-2026-72142
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.
-
CVE-2026-72141
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg-len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework.
-
CVE-2026-72386
•
published on August 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective.
