Full List

Search

Recent Vulnerabilities

• CVE-2026-72218 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file-f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file.
• CVE-2026-72214 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak In cpcap_battery_detect_battery_type(), the reference to an nvmem device obtained via nvmem_device_find() is not released with nvmem_device_put() on the success or read-failure paths, causing a permanent reference leak. The driver’s retry logic on subsequent battery property reads can compound this leak, preventing the nvmem device from ever being freed. Found by code review.
• CVE-2026-72212 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path.
• CVE-2026-72211 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds.
• CVE-2026-72198 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a-non_resident. ntfs_inode_sync_standard_information() does the same when updating the standard information value. ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and index.c depend on the same lookup contract before consuming the resident index root value. Reject non-resident records for all resident-only attribute types in the shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior, but factor it through a helper and extend it to $STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and $EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract hardening for resident-only formats; this patch only rejects the non-resident form and does not add new resident value validation for those types.
• CVE-2026-72194 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add depth limit to indx_find_buffer to prevent stack overflow indx_find_buffer() recursively descends the B+ tree index with no depth limit. A crafted NTFS image with circular index node references causes unbounded recursion, overflowing the kernel stack and panicking the system. This is reachable by mounting a malicious NTFS filesystem (e.g. from a USB drive via desktop automount) and deleting a file whose index entry triggers the rebalancing fallback path in indx_delete_entry(). Add a depth parameter and bail out with -EINVAL when it reaches the fnd-nodes array bound, matching the constraint already enforced by fnd_push() in indx_find(). The related function indx_find() was previously patched for a similar infinite-loop issue (commit 1732053c8a6b), but indx_find_buffer() was missed.
• CVE-2026-72189 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ntfs: fail attrlist updates when the superblock is inactive generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes. If eviction selects the fake inode for a base inode's unnamed $ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's reference on the base inode while the fake inode is still hashed and marked I_FREEING. That iput can synchronously write back the base inode. The writeback path may update mapping pairs and call ntfs_attrlist_update(), which unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake inode. VFS then finds the I_FREEING inode and waits for eviction to finish, but the current task is still inside that eviction path, causing a self-deadlock in find_inode(). Fix this by mirroring the teardown guard used by __ntfs_write_inode(): once SB_ACTIVE has been cleared, do not try to iget the attribute-list fake inode. Return -EIO so teardown aborts the update instead of waiting on the inode it is evicting.
• CVE-2026-72181 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: mips: sched: Fix CPUMASK_OFFSTACK memory corruption This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data directly into the allocated buffer.
• CVE-2026-72178 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: always put unsuccessfully committed target pids damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko.
• CVE-2026-72177 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs() Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in error paths". Error paths of damon_sysfs_access_pattern_add_dirs() and damon_sysfs_scheme_add_dirs() functions put references to directories in wrong orders. As a result, uninitialized memory dereference and/or memory leak can happen. Fix those. This patch (of 2): In access_pattern_add_dirs(), error handling path puts references starting from setup failed directories. If the failure happpened from the initial allication in the setup functions, uninitialized memory dereference happen. The allocation failures will not commonly happen, but the consequence is quite bad. Fix the wrong reference put orders. The issue was discovered [1] by Sashiko.
• CVE-2026-72175 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race Patch series "userfaultfd/pagemap: pre-existing fixes". These are pre-existing bug fixes that were carried at the front of the userfaultfd RWP working-set-tracking series up to v5 [1]. Per review feedback that fixes should not sit in the middle of a feature series, they are split out and sent on their own; the RWP series is reposted rebased on top of this. All six were flagged by the Sashiko AI review of the RWP series and carry independent of RWP, apply to mm-new directly, and carry Cc: stable@. 1: fs/proc/task_mmu: a missing huge_ptep_modify_prot_start() in make_uffd_wp_huge_pte() can lose hardware Dirty/Accessed updates when PAGEMAP_SCAN write-protects a hugetlb PTE. 2: fs/proc/task_mmu: pagemap_scan_hugetlb_entry() compares the range against HPAGE_SIZE rather than the hstate page size, so it never write-protects gigantic hugetlb pages. 3: fs/proc/task_mmu: PAGEMAP_SCAN with PM_SCAN_WP_MATCHING over an unpopulated hugetlb range self-deadlocks -- pagemap_scan_pte_hole() calls uffd_wp_range() while walk_hugetlb_range() holds the hugetlb vma lock for read, and hugetlb_change_protection() then takes it for write. Install the marker inline instead. 4: mm/huge_memory: change_non_present_huge_pmd() drops pmd_swp_uffd_wp on a device-private PMD permission downgrade, silently losing the uffd-wp marker. 5: userfaultfd: must_wait() applies pte_write() to a locklessly read PTE without checking pte_present(), so swap/migration entries decode random offset bits and a thread can stay parked on a stale fault. 6: userfaultfd: __VMA_UFFD_FLAGS feeds VMA_UFFD_MINOR_BIT (41) to mk_vma_flags() unconditionally, an out-of-bounds write into the single-word vma_flags_t on 32-bit. Build the mask from config-gated per-mode masks so an unavailable bit is never materialised. This patch (of 6): make_uffd_wp_huge_pte() arms the UFFD_WP bit on a present HugeTLB PTE by calling huge_ptep_modify_prot_commit() with a ptent snapshot that was fetched without the corresponding huge_ptep_modify_prot_start(). The start helper is what atomically clears the entry so the kernel-owned snapshot stays consistent until the commit; without it, the hardware may set Dirty or Accessed in the live PTE between the original read and the commit, and huge_ptep_modify_prot_commit() (whose generic implementation just calls set_huge_pte_at()) then writes the stale snapshot back over the live hardware bits, losing the update. The non-hugetlb sibling make_uffd_wp_pte() does this correctly via ptep_modify_prot_start() / ptep_modify_prot_commit(). Mirror that pattern for the present-PTE branch. The migration case stays as-is -- migration entries are non-present, so there's no hardware update to race against.
• CVE-2026-72166 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net/9p: fix infinite loop in p9_client_rpc on fatal signal When p9_client_rpc() is called with type P9_TFLUSH and the transport has no peer (e.g. fd transport backed by pipes with no 9p server), a fatal signal causes an infinite loop: again: err = io_wait_event_killable(req-wq, ...) /* SIGKILL wakes the task, returns -ERESTARTSYS */ if (err == -ERESTARTSYS && c->status == Connected && type == P9_TFLUSH) { sigpending = 1; clear_thread_flag(TIF_SIGPENDING); goto again; } clear_thread_flag() clears TIF_SIGPENDING before jumping back to io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING, finds it zero, and the task goes to sleep again. The task can only wake on the next signal delivery that calls signal_wake_up() and sets TIF_SIGPENDING again. When that happens the loop repeats, clears TIF_SIGPENDING, and sleeps again indefinitely. This is triggered in practice by coredump_wait(): when a thread in a multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall User Dispatch), coredump_wait() sends SIGKILL to all other threads and waits for them to call mm_release(). If one of those threads is blocked in p9_client_rpc() over an fd transport with no peer, it enters the P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls forever: INFO: task syz.0.18:676 blocked for more than 143 seconds. Not tainted 6.12.77+ #1 task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004 Call Trace: TASK> context_switch kernel/sched/core.c:5344 [inline] __schedule+0xcb4/0x5d50 kernel/sched/core.c:6724 __schedule_loop kernel/sched/core.c:6801 [inline] schedule+0xe5/0x350 kernel/sched/core.c:6816 schedule_timeout+0x253/0x290 kernel/time/timer.c:2593 do_wait_for_common kernel/sched/completion.c:95 [inline] __wait_for_common+0x409/0x600 kernel/sched/completion.c:116 wait_for_common kernel/sched/completion.c:127 [inline] wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264 coredump_wait fs/coredump.c:448 [inline] do_coredump+0x854/0x4350 fs/coredump.c:629 get_signal+0x1425/0x2730 kernel/signal.c:2903 arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218 do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so fatal_signal_pending() works correctly. If a fatal signal is pending, jump to recalc_sigpending to restore TIF_SIGPENDING and return -ERESTARTSYS to the caller. The same defect is present in stable kernels back to 5.4. On those kernels the infinite loop is broken earlier by a second SIGKILL from the parent process (e.g. kill_and_wait() retrying after a timeout), resulting in a zombie process and a shutdown delay rather than a permanent D-state hang, but the underlying flaw is the same. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
• CVE-2026-72160 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode-i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode().
• CVE-2026-72157 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)-nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()").
• CVE-2026-72156 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL.
• CVE-2026-72153 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data-hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data.
• CVE-2026-72151 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret() without installing a completion callback, discards both return values, and immediately frees the kpp_request via kpp_request_free(). When the resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE, keembay-ocs), either operation returns -EINPROGRESS and the deferred completion worker dereferences the freed request. The path fires automatically from the hwrng_fillfn kernel thread via tpm_get_random - tpm2_get_random -> tpm2_start_auth_session -> tpm_buf_append_salt on every entropy poll, without any userland action. Install crypto_req_done as the completion callback, wrap both KPP operations in crypto_wait_req(), and propagate errors to the caller. The wait is a no-op for synchronous backends.
• CVE-2026-72150 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data.
• CVE-2026-72148 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA channels, and modifying them requires a read-modify-write sequence. Because this operation is not atomic, concurrent calls to dw_edma_v0_core_start() can introduce race conditions if two channels update these registers simultaneously. Add a spinlock to serialize access to these registers and prevent race conditions. [den: update dw_edma.lock comment]
• CVE-2026-72144 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill.