Full List

Search

Recent Vulnerabilities

• CVE-2026-72064 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net: mana: Sync page pool RX frags for CPU MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack.
• CVE-2026-72057 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb-cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments().
• CVE-2026-72050 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp-bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths.
• CVE-2026-72049 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations).
• CVE-2026-72046 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq-tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing.
• CVE-2026-72045 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req-base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block.
• CVE-2026-72043 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings.
• CVE-2026-72036 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct -dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected.
• CVE-2026-72034 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: fhandle: reject detached mounts in capable_wrt_mount() The recent fhandle RCU fix moved the mount namespace capability check into capable_wrt_mount(), so a non-NULL mnt_namespace survives the ns_capable() dereference. The helper still assumes the later READ_ONCE(mount-mnt_ns) must be non-NULL because may_decode_fh() checked is_mounted() first. That assumption is not stable. A detached mount from open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while open_by_handle_at() is between those checks, and umount_tree() can clear mount->mnt_ns. If the helper observes NULL, it dereferences mnt_ns->user_ns and panics. Return false when the RCU read observes a detached mount. This keeps the relaxed permission path conservative: a mount no longer attached to a namespace cannot authorize open_by_handle_at() access.
• CVE-2026-72033 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: orangefs: keep the readdir entry size 64-bit in fill_from_part() fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client.
• CVE-2026-72025 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records.
• CVE-2026-72022 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model.
• CVE-2026-72021 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset.
• CVE-2026-72020 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later.
• CVE-2026-72019 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb-head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose.
• CVE-2026-72018 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL.
• CVE-2026-72017 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue-tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty.
• CVE-2026-72008 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of one to generic_pm_domain as, even if that's still working, this is way too much fragile and would break at some point.
• CVE-2026-72003 • published on August 15, 2026 In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: fix heap overflow on a short auth frame brcmf_notify_auth_frame_rx() takes the frame length from the firmware event and copies the frame body with the management header offset subtracted: u32 mgmt_frame_len = e-datalen - sizeof(struct brcmf_rx_mgmt_data); ... memcpy(&mgmt_frame->u, frame, mgmt_frame_len - offsetof(struct ieee80211_mgmt, u)); The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When mgmt_frame_len is below that, the subtraction wraps as an unsigned value to a huge length. The memcpy then runs far past the kzalloc'd buffer. A malicious or malfunctioning AP can make the frame short during the external SAE auth exchange, so this is a remotely triggered heap overflow. Reject frames shorter than the management header offset before the copy.
• CVE-2026-71988 • published on August 8, 2026 MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the portFw function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the alg function to execute malicious commands and obtain root privileges on the underlying system.